Snapper 20HP, 19HP user manual Features & Controls

Page 10

Ignition Switch

The ignition switch starts and stops the engine; it has three positions:

OFF

Stops the engine and shuts off the

 

electrical system.

RUN

Allows the engine to run and powers the

 

electrical system.

START

Cranks the engine for starting.

NOTE: Never leave the ignition switch in the RUN position with the engine stopped–this drains the battery.

Hour Meter

The hour meter measures the number of hours the key has been in the RUN position.

Note: The hour meter will register the passage of time when the key is in the RUN position, even if the engine is not running. The hour meter has a self contained power source so the total hours are always visible.

PTO Switch

The PTO (Power Take-Off) switch engages and disengages attachments that use the PTO. To engage the PTO, pull UP on the switch. Push DOWN to disengage. Note that the operator must be seated firmly in the rider seat for the PTO to function.

Transmission Oil Fill

Transmission oil is added through the transmission oil expansion chamber. It also serves as extra holding capacity for oil as the transmission heats up and the oil expands. See CHECK TRANSMISSION OIL LEVEL for oil level check and fill procedures.

Transmission Release Valves

The transmission release valves deactivate the transmissions so that the unit can be pushed by hand. See PUSHING THE UNIT BY HAND for operational information.

Seat Adjustment Lever

The seat can be adjusted forward and backward. Move the adjustment lever towards the left, slide the seat to the desired position, and release the lever.

Features & Controls

Fuel Tank

Fuel Level Gauge

To remove the cap, turn counterclockwise. The fuel gauge is mounted in the fuel tank and indicates the amount of fuel in the tank.

Mower Height of Cut Adjustment &

Attachment Lift Control Lever

To adjust cutting height, pull the large lever back fully to lock the control in the attachment raised transport position. Position the cutting height selector pin on the appropriate hole to achieve the desired cutting height. Pull back on the small lift latch lever and large lever simultaneously, and lower the mower into cutting position.

For attachment transport lift, pull the large lift lever back fully to lock the control in the attachment raised transport position.

Parking Brake

DISENGAGE

Releases the parking brake.

ENGAGE

Locks the parking brake.

Pull the parking brake lever back to engage the parking brake. Move the lever fully forward to disengage the parking brake. NOTE: To start the unit the parking brake must be engaged.

9

Page 9 Page 11
Image 10
Page 9 Page 11
Contents 19HP Zero-Turn Riders 18HP Zero-Turn Riders20HP Zero-Turn Riders Table of Contents Safety Rules and Information General OperationIgnition System Service & Maintenance Safe Handling of GasolineNorth American Identification NumbersCE Identification TAG Markings CE ModelsNorth American Models Safety DecalsSafety Decals ALL ModelsSafety Interlock System Safety IconsOperational Safety Checks Ground Speed Levers Throttle Control Control FunctionsChoke Features & Controls General Operating Safety Checks Before StartingStopping the Rider and Engine OperationStarting the Engine MowingForward Travel Practice Zero Turn Driving PracticeSmooth Travel Reverse Travel PracticeExecuting an End-Of-Row Zero Turn Practice Turning Around a CornerExecuting Turns Trailer Weight Recommendations Clevis Pin Clip Attaching a TrailerInstallation Mower Removal InstallationRemoval Regular Maintenance Before Every Spring Each Hours 100 250 Fall UseRegular Maintenance LubricationService Interval Every 10 Hours or As Required Servicing the Mower BladesChecking / Adding Fuel Engine Maintenance Check /FILL Transmission OILCheck Tire Pressures Fuel FilterTransmission OIL Filter Change Change Interval Every 250 Hours Filter Part NumberCleaning the Battery and Cables Battery MaintenanceStorage Troubleshooting Adjustments, & Service Troubleshooting the RiderTroubleshooting, Adjustments, & Service Troubleshooting the MowerGround Speed Control Lever Adjustment Troubleshooting, Adjustments, & ServiceSeat Adjustment Seat Position AdjustmentCutting Height Adjustment Speed Balancing AdjustmentNeutral Adjustment Parking Brake Adjustment Parking Brake Adjustment Brake Spring Set Collar LocknutSuspension Adjustment Select Models PTO Clutch Adjustment Blade Brake CheckMower Deck Leveling Mower Belt Replacement Roller BAR Leveling Select ModelsHydraulic Pump Drive Belt Replacement Battery ChargingChassis DimensionsEngine TransmissionsTall Grass Requires Incremental Cutting HOW and When to WATER, Fertilize & AerateHOW High to MOW the Grass Cut Here On First Pass SecondLawn Care & Mowing Information When and HOW Often to MOWProper Mowing Speed

19HP, 20HP specifications

The Snapper 20HP and 19HP lawn tractors are robust and efficient machines designed for both residential and commercial lawn maintenance. These models are recognized for their durability, comfort, and innovative technology.

One of the standout features of the Snapper 20HP and 19HP is their powerful Briggs & Stratton engine. With an impressive horsepower rating, these tractors can handle a variety of tasks ranging from mowing to towing. The engines are designed for easy starting, reliability, and long-lasting performance, ensuring that users can tackle even the toughest jobs without hesitation.

Both models boast a wide cutting deck, providing excellent mowing coverage and reducing the number of passes needed to achieve a well-manicured lawn. The cutting heights are adjustable, allowing users to customize the grass height according to their preferences. The 20HP version typically features a slightly larger deck, enhancing its efficiency for larger properties.

Comfort is a key aspect of the Snapper tractors. They come equipped with an ergonomically designed seat that offers ample support during prolonged use. The placement of controls is such that they are within easy reach, allowing for smooth operation. Additionally, the models provide a tight turning radius, making navigation around obstacles like flower beds and trees seamless.

Technologically, the Snapper 20HP and 19HP integrate features such as a hydrostatic transmission system. This provides users with a smooth driving experience and precise control over speed and direction without the need for shifting gears. The hydrostatic drive also minimizes wear and tear, extending the lifespan of the tractor.

Another notable characteristic of these models is their durable construction. Built with high-quality materials, the Snapper tractors are designed to withstand the rigors of frequent use. The chassis is sturdy, ensuring stability and support even on uneven terrain.

Maintenance is simplified with these tractors, featuring easy-access components that allow for quick servicing and upkeep. Regular maintenance checks can be performed without hassle, contributing to the tractors' longevity.

In conclusion, the Snapper 20HP and 19HP lawn tractors are ideal choices for homeowners and professionals alike. Featuring powerful engines, comfortable operation, innovative technology, and a focus on durability, these models ensure effective lawn care and performance for years to come.
Top Page Image Contents