Snapper 20HP, 19HP user manual Battery Maintenance, Storage, Cleaning the Battery and Cables

Page 22

BATTERY MAINTENANCE

Cleaning the Battery and Cables

1.Disconnect the cables from the battery, negative cable first (B, Figure 19).

2.Clean the battery terminals and cable ends with a wire brush until shiny.

3.Reinstall the battery and reattach the battery cables, positive cable first (see A, Figure 19)

4.Coat the cable ends and battery terminals with petroleum jelly or non-conducting grease.

WARNING

Be careful when handling the battery. Avoid spilling electrolyte. Keep flames and sparks away from the battery.

When removing or installing battery cables, disconnect the negative cable FIRST and reconnect it LAST. If not done in this order, the positive terminal can be shorted to the frame by a tool.

Regular Maintenance

STORAGE

Before you store your unit for the off-season, read the Maintenance and Storage instructions in the Safety Rules section, then perform the following steps:

•Disengage the PTO, set the parking brake, & remove the key.

•Perform engine maintenance and storage measures listed in the engine owner’s manual. This includes draining the fuel system, or adding stabilizer to the fuel (do not store a fueled unit in an enclosed structure - see warning).

•Battery life will be increased if it is removed, put in a cool, dry place and fully charged about once a month. If the battery is left in the unit, disconnect the negative cable.

Before starting the unit after it has been stored:

•Check all fluid levels. Check all maintenance items.

•Perform all recommended checks and procedures found in the engine owner’s manual.

•Allow the engine to warm up for several minutes before use.

WARNING

Never store the unit (with fuel) in an enclosed, poorly ventilated structure. Fuel vapors can travel to an ignition source (such as a furnace, water heater, etc.) and cause an explosion. Fuel vapor is also toxic to humans and animals.

21

Page 21 Page 23
Image 22
Page 21 Page 23
Contents 19HP Zero-Turn Riders 18HP Zero-Turn Riders20HP Zero-Turn Riders Table of Contents Safety Rules and Information General OperationIgnition System Service & Maintenance Safe Handling of GasolineNorth American Identification NumbersCE Identification TAG Markings CE ModelsNorth American Models Safety DecalsSafety Decals ALL ModelsSafety Interlock System Safety IconsOperational Safety Checks Ground Speed Levers Throttle Control Control FunctionsChoke Features & Controls General Operating Safety Checks Before StartingStopping the Rider and Engine OperationStarting the Engine MowingForward Travel Practice Zero Turn Driving PracticeSmooth Travel Reverse Travel PracticeExecuting an End-Of-Row Zero Turn Practice Turning Around a CornerExecuting Turns Trailer Weight Recommendations Clevis Pin Clip Attaching a TrailerInstallation Mower Removal InstallationRemoval Regular Maintenance Before Every Spring Each Hours 100 250 Fall UseRegular Maintenance LubricationService Interval Every 10 Hours or As Required Servicing the Mower BladesChecking / Adding Fuel Engine Maintenance Check /FILL Transmission OILCheck Tire Pressures Fuel FilterTransmission OIL Filter Change Change Interval Every 250 Hours Filter Part NumberCleaning the Battery and Cables Battery MaintenanceStorage Troubleshooting Adjustments, & Service Troubleshooting the RiderTroubleshooting, Adjustments, & Service Troubleshooting the MowerGround Speed Control Lever Adjustment Troubleshooting, Adjustments, & ServiceSeat Adjustment Seat Position AdjustmentCutting Height Adjustment Speed Balancing AdjustmentNeutral Adjustment Parking Brake Adjustment Parking Brake Adjustment Brake Spring Set Collar LocknutSuspension Adjustment Select Models PTO Clutch Adjustment Blade Brake CheckMower Deck Leveling Mower Belt Replacement Roller BAR Leveling Select ModelsHydraulic Pump Drive Belt Replacement Battery ChargingChassis DimensionsEngine TransmissionsTall Grass Requires Incremental Cutting HOW and When to WATER, Fertilize & AerateHOW High to MOW the Grass Cut Here On First Pass SecondLawn Care & Mowing Information When and HOW Often to MOWProper Mowing Speed

19HP, 20HP specifications

The Snapper 20HP and 19HP lawn tractors are robust and efficient machines designed for both residential and commercial lawn maintenance. These models are recognized for their durability, comfort, and innovative technology.

One of the standout features of the Snapper 20HP and 19HP is their powerful Briggs & Stratton engine. With an impressive horsepower rating, these tractors can handle a variety of tasks ranging from mowing to towing. The engines are designed for easy starting, reliability, and long-lasting performance, ensuring that users can tackle even the toughest jobs without hesitation.

Both models boast a wide cutting deck, providing excellent mowing coverage and reducing the number of passes needed to achieve a well-manicured lawn. The cutting heights are adjustable, allowing users to customize the grass height according to their preferences. The 20HP version typically features a slightly larger deck, enhancing its efficiency for larger properties.

Comfort is a key aspect of the Snapper tractors. They come equipped with an ergonomically designed seat that offers ample support during prolonged use. The placement of controls is such that they are within easy reach, allowing for smooth operation. Additionally, the models provide a tight turning radius, making navigation around obstacles like flower beds and trees seamless.

Technologically, the Snapper 20HP and 19HP integrate features such as a hydrostatic transmission system. This provides users with a smooth driving experience and precise control over speed and direction without the need for shifting gears. The hydrostatic drive also minimizes wear and tear, extending the lifespan of the tractor.

Another notable characteristic of these models is their durable construction. Built with high-quality materials, the Snapper tractors are designed to withstand the rigors of frequent use. The chassis is sturdy, ensuring stability and support even on uneven terrain.

Maintenance is simplified with these tractors, featuring easy-access components that allow for quick servicing and upkeep. Regular maintenance checks can be performed without hassle, contributing to the tractors' longevity.

In conclusion, the Snapper 20HP and 19HP lawn tractors are ideal choices for homeowners and professionals alike. Featuring powerful engines, comfortable operation, innovative technology, and a focus on durability, these models ensure effective lawn care and performance for years to come.
Top Page Image Contents