Snapper 2400 Series manual Mower Removal and Installation

Page 18

Operating the Rider

*2396

Figure 7. Mower Removal/Installation (34” mower shown)

A. Idler Pulley Arm

D.

Lift Cable

B. Idler Pulley

E.

Lift Hook

C. PTO (Electric Clutch) Pulley

F.

Rear Trailing Arms

WARNING

Stop engine and remove key. Do not engage PTO until mower is completely removed or installed and operator is seated.

MOWER REMOVAL AND INSTALLATION

NOTE: Perform mower installation on a hard, level sur- face such as a concrete floor. For easier mower removal and installation, rear trailing arms (F, Figure 7) can be removed by removing spring clips and clevis pins.

1.Park rider and turn off PTO switch and engine, remove the key and apply parking brake. Turn the wheels fully to the left.

*2390

Figure 8. Mower Hitch

A. LeverC. Rider Hitch Brackets

B. Mower Hitch

2.On left-hand side of 34” mower, push idler pulley arm (A, Figure 7) to relieve belt tension.

On right-hand side of 30” mower, pull idler pulley arm to relieve belt tension.

3.With belt tension relieved, remove belt from idler pul- ley (B, Figure 7) and PTO pulley (C). Removing belt relieves tension on the front hitch assembly.

4.With lift lever down and Dial-A-CutTMcontrol set to the lowest setting, remove lift cable (D, Figure 7) from mower hook (see inset illustration, Figure 7).

NOTE: Pull back slightly on the lift lever to allow easier turning of the Dial-A-CutTMcontrol.

5.Remove mower hitch (B, Figure 8) from rider hitch brackets (C) by pulling spring-loaded lever (A) for- ward and lifting up on hitch. Place mower hitch on ground.

6.With wheels turned fully left, remove mower from underneath right-hand side of rider.

7.To install mower, reverse above steps. Check mower belt pattern (as shown in Figure 5). Make sure that the mower lift cable is installed with hook toward the rear (see Figure 7 inset) and rear trailing arms (F, Figure 7) are positioned above rear torsion bar.

16

Page 17 Page 19
Image 18
Page 17 Page 19
Contents OPERATOR’S Manual 13HP Hydro Riders Mower DecksPage Table of Contents Safety Rules & Information Operating Safety Safety Rules and Information Slope OperationSafety Rules & Information General OperationIgnition System Service and Maintenance Identification Numbers CE Identification TAG MarkingsSafety Decals Safety DecalsCE Safety Icons Safety IconsThrottle Control Control FunctionsThrottle/Choke Control ChokeFeatures & Controls Adding Fuel General Operating SafetyOperational Safety Checks Checks Before StartingOperating the Rider Starting the EngineSelecting Ground & Engine Speed Stopping the RiderOperating the Mower Mowing in Reverse Attachment Operation in ReversePushing the Rider by Hand Mower Removal and Installation Storage Regular Maintenance Check Tire PressuresRaising the Seat Deck Fuel FilterRegular Maintenance LubricationBattery Maintenance Cleaning the Battery and CablesLubricate Rear Axle Shafts Servicing the Mower Blades Removing The BladeTroubleshooting Adjustments & Service Troubleshooting the RiderTroubleshooting, Adjustment & Service Troubleshooting the MowerTroubleshooting the Rider Seat Adjustment Steering Gear AdjustmentSteering Wheel Adjustment Brake Adjustment AdjustmentsBrake Adjustment Blade Brake CheckMower Adjustments Side-To-Side LevelingFront-To-Back Leveling Battery Charging Transport Height AdjustmentBelt Replacement Rider Drive BeltMower Belt Chassis DimensionsEngine TransmissionOptional Accessories Replacement PartsMaintenance Items Technical ManualsPage Lawn Care Lawn Care & Mowing Information Page

2400 Series specifications

The Snapper 2400 Series is a well-engineered line of outdoor power equipment recognized for its robust performance and user-friendly design. Built to deliver outstanding cutting results, this series is suitable for both residential and commercial users who seek reliability and efficiency in their gardening tools.

One of the key features of the Snapper 2400 Series is its powerful engine. Equipped with a high-performance Briggs & Stratton engine, these mowers can handle tough grass and uneven terrains with ease. The reliable starting system eliminates the frustration typical of other models, ensuring that users can get to work quickly and efficiently.

The cutting deck of the Snapper 2400 Series is another highlight. With its innovative design and durable construction, the cutting deck provides a wide mowing path that allows for faster completion of lawn care tasks. The high-quality steel deck is resistant to wear and tear, and its sleek design ensures optimal air flow for a clean cut, further enhancing the mower's performance.

Maneuverability is another standout feature of the Snapper 2400 Series. With features like zero-turn capabilities, users can navigate around trees, flower beds, and other landscape features effortlessly. The ergonomic controls add to the user-friendly experience, making operation smoother and more enjoyable, even for those who may be new to lawn maintenance.

The Snapper 2400 Series is also known for its versatility. Many models within the series offer multiple cutting height adjustments, allowing users to adapt the mower's performance to different grass types and conditions. Furthermore, optional attachments such as mulching kits and baggers provide extra functionality, enabling users to customize their mowing experience.

In terms of durability, the Snapper 2400 Series is built with heavy-duty components that stand up to rigorous use. This quality construction ensures that the products not only perform well but also last longer, offering great value for the investment.

In conclusion, the Snapper 2400 Series combines powerful engines, efficient cutting systems, versatile features, and durable construction, making it a reliable choice for anyone looking for high-quality lawn care equipment. With its emphasis on user experience and performance, the Snapper 2400 Series stands out in its category, appealing to homeowners and professionals alike.
Top Page Image Contents