Snapper 2400 Series manual Adjustments, Brake Adjustment, Blade Brake Check

Page 28

Adjustments

BRAKE ADJUSTMENT

Brake Adjustment

1.Release the parking brake.

2.Brake arm (C, Figure 25) should be touching stop

(B).

3.Remove cotter pin (D) and loosen the castle nut (A). Place a 0.015” feeler gauge (E) gap between the brake disc (F) and the brake puck (G).

a.To decrease gap, insert feeler gauge in gap and turn nut (A) clockwise until resistance is felt on the feeler gauge. To increase gap, turn nut (A) counter-clockwise and recheck gap.

b.Back off nut (counter-clockwise) until the nearest slot is aligned with hole in threads. Replace cotter pin.

3.Set the parking brake. Loosen or tighten adjustment nut (H) to achieve a 1-5/8” -1-3/4” compressed spring length as shown in Figure 24.

BLADE BRAKE CHECK

Mower blades and mower drive belt should come to a complete stop within five seconds after electric PTO switch is turned off.

1.With rider in neutral, PTO disengaged and operator in seat, start the rider engine.

2.Look over the left-hand footrest at the mower drive belt. Engage the PTO and wait several seconds. Disengage the PTO and check the amount of time it takes for the mower drive belt to stop.

3.If mower drive belt does not stop within five seconds, see your dealer.

 

1-5/8” - 1-3/4”

 

H

A

 

B

G

C

 

D

F

 

E

Figure 25. Brake Adjustment

A. Castle Nut

E. Feeler Gauge

B. Stop

F. Brake Disc

C. Brake Arm

G. Brake Puck

D. Cotter Pin

H. Adjustment Nut

26

Image 28
Contents OPERATOR’S Manual 13HP Hydro Riders Mower DecksPage Table of Contents Safety Rules & Information Operating Safety Safety Rules and Information Slope OperationSafety Rules & Information General OperationIgnition System Service and Maintenance Identification Numbers CE Identification TAG MarkingsSafety Decals Safety DecalsCE Safety Icons Safety IconsControl Functions Throttle/Choke ControlThrottle Control ChokeFeatures & Controls General Operating Safety Operational Safety ChecksAdding Fuel Checks Before StartingOperating the Rider Starting the EngineStopping the Rider Selecting Ground & Engine SpeedOperating the Mower Attachment Operation in Reverse Mowing in ReversePushing the Rider by Hand Mower Removal and Installation Storage Regular Maintenance Check Tire PressuresRaising the Seat Deck Fuel FilterRegular Maintenance LubricationCleaning the Battery and Cables Battery MaintenanceLubricate Rear Axle Shafts Servicing the Mower Blades Removing The BladeTroubleshooting Adjustments & Service Troubleshooting the RiderTroubleshooting the Mower Troubleshooting, Adjustment & ServiceTroubleshooting the Rider Steering Gear Adjustment Seat AdjustmentSteering Wheel Adjustment Adjustments Brake AdjustmentBrake Adjustment Blade Brake CheckMower Adjustments Side-To-Side LevelingFront-To-Back Leveling Battery Charging Transport Height AdjustmentRider Drive Belt Belt ReplacementMower Belt Dimensions EngineChassis TransmissionReplacement Parts Maintenance ItemsOptional Accessories Technical ManualsPage Lawn Care Lawn Care & Mowing Information Page

2400 Series specifications

The Snapper 2400 Series is a well-engineered line of outdoor power equipment recognized for its robust performance and user-friendly design. Built to deliver outstanding cutting results, this series is suitable for both residential and commercial users who seek reliability and efficiency in their gardening tools.

One of the key features of the Snapper 2400 Series is its powerful engine. Equipped with a high-performance Briggs & Stratton engine, these mowers can handle tough grass and uneven terrains with ease. The reliable starting system eliminates the frustration typical of other models, ensuring that users can get to work quickly and efficiently.

The cutting deck of the Snapper 2400 Series is another highlight. With its innovative design and durable construction, the cutting deck provides a wide mowing path that allows for faster completion of lawn care tasks. The high-quality steel deck is resistant to wear and tear, and its sleek design ensures optimal air flow for a clean cut, further enhancing the mower's performance.

Maneuverability is another standout feature of the Snapper 2400 Series. With features like zero-turn capabilities, users can navigate around trees, flower beds, and other landscape features effortlessly. The ergonomic controls add to the user-friendly experience, making operation smoother and more enjoyable, even for those who may be new to lawn maintenance.

The Snapper 2400 Series is also known for its versatility. Many models within the series offer multiple cutting height adjustments, allowing users to adapt the mower's performance to different grass types and conditions. Furthermore, optional attachments such as mulching kits and baggers provide extra functionality, enabling users to customize their mowing experience.

In terms of durability, the Snapper 2400 Series is built with heavy-duty components that stand up to rigorous use. This quality construction ensures that the products not only perform well but also last longer, offering great value for the investment.

In conclusion, the Snapper 2400 Series combines powerful engines, efficient cutting systems, versatile features, and durable construction, making it a reliable choice for anyone looking for high-quality lawn care equipment. With its emphasis on user experience and performance, the Snapper 2400 Series stands out in its category, appealing to homeowners and professionals alike.