Dynacord manual CXM 15 / CXM 15W, Coaxial Monitor Speaker Cabinet

Page 64

CXM 15 / CXM 15W

CXM 15 / CXM 15W

COAXIAL MONITOR SPEAKER CABINET

•Coaxial Monitor 15“ / 1.4“ 2-Way

•102 dB SPL / 1 W / 1m

•Max. 135 dB SPL / 1 m

•Light Weight 19 kg

•Switchable to Biamp Mode

•FIR and IIR Presets available

The DYNACORD CXM 15 is a lightweight wedge for professional monitoring applications. The DYNACORD DCX15450 two-way 15“ / 1.4“ transducer uses a coaxially mounted HF unit and can be used in passive or bi-amped operating mode.

The acoustic crossover frequency between the 15“ low-frequency transducer and the 1.4“ mid-high compression driver is at 1.2 kHz. The slope of the built-in passive cross- over network is 12 dB / octave. Extremely precise vocal definition is assured by the comparatively low crossover frequency and the coaxial transducer design. Power amplifiers are connected to the CXM 15 via Speakon NL4MPR

connectors. The pin assignment in passive mode is 1+ / 1-. Switching from passive mode to bi-amped mode is performed by operation of

aslider switch. In bi-amping mode, pins 1+ / 1- are connected to the 15“ low frequency section of the CXM 15 and pins 2+ / 2- to the 1.4“ mid-high-frequency section.

The CXM 15 is equipped with three Speakon sockets switched in parallel. This simplifies the daisy-chaining of multiple wedges and pole-mounted CXM 15 cabinets. The 1.4“ MF/HF compression driver is safeguarded against thermal overload by the fully-electronic Voice Coil Tracking Protection system, which exhibits „soft“ switching characteristics, sparing audiences the annoying

clicks and pops that are the bugbear of conventional solutions. Both FIR and IIR presets are available for a wide variety of operating modes. The CXM 15 is constructed from birch plywood and therefore extremely resistant to abuse on the road. All cabinet connections are slotted and glued. The surface is protected by a hard-wearing textured finish.

Apowder-coated steel grille backed by acoustic foam protects the loudspeaker components from ac- cidental damage. A recessed adapter is provided to facilitate pole-moun- ting. Handles have been integrated into both sides of the CXM 15.

Aversion of the CXM 15 in white is also available: the CXM 15W.

OPTIMIZED FACTORY PRESETS INCLUDING FIR-TUNE LINEARIZATION ARE AVAILABLE FOR DSP 600, P 64 AND PowerH AMPLIFIERS WITH RCM-26

UNDER IRIS-NET.

64

Page 63 Page 65
Image 64
Page 63 Page 65
Contents Loudspeaker Systems More than 60 Years of PRO Audio ExperienceContents Technical Specifications Applications Guide German Engineering Excellence History Milestones Echocord DRS-78 PowerMate Cobra PowerH Bosch Production Systems Bosch Production System Quality with SystemMeasurement Hall ManufacturingManufacturing Lite Series Lite Series Lite Series Loudspeaker Systems12T 12RW 12TW 12-3 15-3 Powersub Powersub D 8W Fullrange CabinetD 8W Page Powered Fullrange Cabinet DD 8A8ADistorsion-free, clear sound at peak levels 11A Fullrange Cabinets 12 · D 12W · D 12T · D 12TW · D 12R · D 12RW 12-3 Uncolored, extremely low-distortion vocal reproduction 15-3 Designs are among the classics of pro audio historyDesigns are Among the Classics of PRO Audio History SUB Sub SubwooferSub 115 SUB 115 and SUB Sub 115 PowerSub Powered SubwooferPowerSub 212 is an PowerSub Powersub PowerSub Lite SystemLitete Active three-way system combinations Lite activeone Lite activetwoLite activefour Active THREE-WAY SystemAccessories Lite SeriesTC-TV Variline VariLine VariLine Multifunctional Speaker LineSUB Components VariLineUnder IRIS-NET 5252 VL 62 and VL TWO-WAY Fullrange CabinetsHIGH-POWER TWO-WAY Cabinets VL 122, Vlvl 152152 andand VLV L 2122 1VL 122, VL 152 and VL SUB 18 and SUB SUB 18 and SUB SUB 18 and VL SUB 28 and VL Variline EBK M10 Monitor Speakers Monitor Speakers CXM 15 / CXM 15W Coaxial Monitor Speaker CabinetPowered 2-WAY Cabinet Powermax PowerMax Powermax PowerMax TWO-WAY Active SytemXA 2 Systems Xa 2 System Xa 2 System Under IRIS-NET XA 2 System SUB Unit Special Accessories Flying Rails WAY HI-POWER TOP Planar Waveguide SUB Cobra System Cobra System System Components Cobra Compact LINE-ARRAY SystemCOBRA-4 TOP COBRA-PWH System Drives FIR Tune System Drives For COMPACT-LINE-ARRAY SystemsCOBRA-TOP COBRA-SUB COBRA-4 FAR COBRA-PWH Rigging Accessories Rigging Accessories System Racks 9090ICP-88 ICP-48 ICP-44 Cobra-2 Compact LINE-ARRAY Active 2-WAY SystemUnder IRIS-NET Cobra-4 Compact LINE-ARRAY Active 4-WAY SystemCOBRA-4 System Alpha Systems Alpha System Alpha HORN-LOADED THREE-WAY HI-POWER Loudspeaker SystemAlpha B-3 Alpha X-1AND Alpha B-3 Lite Series Technical Specifications 101 VariLine Technical Specifications CXM 15 / CXM 15W Technical Specifications PowerMax 5 Technical Specifications Cobra System Technical Specifications Application Guide Lite Series Application Guide Lite Series Application Guide 109 110 VariLine Application Guide VariLine Application Guide 113 PowerMax 5 Application Guide Xa 2 Application Guide COBRA-2 Application Guide COBRA-4APPLICATION Guide COBRA-4 Application Guide 119 Americas Emea Asia & Pacific

Speaker specifications

Dynacord is a well-respected name in the professional audio industry, renowned for delivering high-quality sound reinforcement solutions. Among their extensive range of products, Dynacord speakers stand out due to their exceptional performance, innovative technologies, and robust construction. These speakers are tailored for both portable applications and fixed installations, catering to a diverse range of users including musicians, sound engineers, and event organizers.

One of the main features of Dynacord speakers is their powerful sound output. Many models are equipped with high-efficiency drivers and advanced acoustic designs that enable them to deliver clear and impactful sound, even in challenging environments. With impressive sound pressure levels, Dynacord speakers can fill large venues, making them ideal for concerts, conferences, and other events.

Dynacord's speakers incorporate cutting-edge technologies that enhance their performance. For instance, the implementation of DSP (Digital Signal Processing) enables precise tuning and control over sound characteristics. Users can access various equalization settings and presets to match the acoustic profile of any venue, ensuring optimal sound quality. Moreover, some models feature integrated amplifiers that provide ample power while minimizing the need for external gear, simplifying setup and reducing equipment load.

Another significant characteristic of Dynacord speakers is their durability and reliability. Built with high-quality materials, these speakers are designed to withstand the rigors of live performances and demanding installations. Many models have weather-resistant enclosures, making them suitable for outdoor events. Additionally, reinforced components contribute to their longevity, allowing users to invest in equipment that will serve them well for years.

Flexibility is a key aspect of Dynacord speakers. Various models come in different sizes and configurations, from compact portable systems to larger line array setups. This versatility allows users to choose speakers that fit their specific needs, whether it’s for small gigs, large festivals, or permanent installations in clubs and theaters.

In summary, Dynacord speakers are characterized by their exceptional sound quality, advanced technologies like DSP, durable construction, and versatility. With a commitment to innovation and customer satisfaction, Dynacord continues to be a top choice for audio professionals seeking reliable and high-performance sound reinforcement solutions.
Top Page Image Contents