Snapper 7-4375 Dealer PRE-SALE Checklist, Cutting Blade & Mower, PRE-START Checks & Services

Page 4

DEALER PRE-SALE CHECKLIST

The following must be accomplished prior sale. Refer to pages 1 - 3 for detailed set-up instructions. Review this list with purchaser. Check () items actually performed and signed on this page.

CUTTING BLADE & MOWER

_____ BLADE RETAINING hardware checked for proper tightness.

_____ BLADE TIP CLEARANCE inside lower edge of mower checked and corrected as needed.

_____ MOWER CUTTING HEIGHT settings checked and adjusted as needed (with tires properly inflated).

_____ MOWER SIDE TO SIDE level checked and adjusted as needed (with tires properly inflated).

_____ MOWER FRONT TO REAR setting checked and adjusted as needed (with tires properly inflated).

PRE-START CHECKS & SERVICES

_____ TIRES checked and inflated to correct pressures.

_____ ENGINE OIL level checked.

_____ FUEL added to tank and system checked for leaks.

_____ BATTERY (not overfilled!) reinstalled and properly connected with red boot over positive terminal.

OPERATIONAL TESTS

_____ CHECK SEAT SWITCH for proper function.

_____ INTERLOCK SYSTEMS checked for proper function.

_____ ENGINE STARTED and throttle control settings checked.

_____ ALL OPERATIONS as listed on console checked.

_____ IGNITION SWITCH checked to insure engine stops when turned to OFF position.

_____ PARKING BRAKE tested to insure proper operation.

_____ BLADE BRAKE function verified. Blade rotation stops in 5 seconds or less.

DEMONSTRATION & INSTRUCTION

_____ DEMONSTRATED proper operation of mower to purchaser.

_____ INSTRUCTED purchaser to read and follow instructions in Operator's Manual.

_____ PERSONALLY HANDED Operator's Manual to purchaser.

_____ ASSISTED purchaser in completing Product Registration cards.

DEALER'S RECORDS

SALE DATE

 

TRACTOR MODEL

 

 

 

 

 

SERIAL NO.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Dealer's Name

 

 

 

Signature

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Address _________________________ City

 

 

 

 

 

 

 

State

Zip

 

 

 

 

 

 

 

 

 

 

TRACTOR WILL BE USED COMMERCIALLY? YES _________ NO

 

 

 

 

Purchaser's Name

 

 

 

 

Signature

 

 

 

 

 

 

 

 

 

 

 

 

Address _________________________ City

 

 

 

 

 

 

 

State

Zip

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IMPORTANT: This form is to be retained by the Dealer for future reference regarding Warranty, proof of purchase, traceability for product recall or service, etc. Complete the SNAPPER Product Registration Card immediately and mail to: Snapper’s Product Registration Center, P.O. Box 1379, McDonough, Georgia 30253.

INSTRUCTION No. 7-4375 (I.R. 2/15/01)

4

Image 4
Contents Activate Battery Activating and Charging BatteryEuropean Snapper LT Series Tractors SEAT/PEDESTAL Asembly RemovalBattery Installation Steering Wheel InstallationInstall OPERATOR’S Seat Reduce Tire PressureCheck Interlock System Engine Must not Start ifDealer PRE-SALE Checklist PRE-START Checks & ServicesCutting Blade & Mower Operational Tests