Snapper ELBC6152BV manual Safety rules regarding outdoor power equipment, Training

Page 3

2safety rules regarding outdoor power equipment

!IMPORTANT! READ CAREFULLY THE FOLLOWING SAFETY RULES BEFORE ASSEMBLING OR OPERATING UNIT.

TRAINING

Read, understand, and follow all instructions in the manu- al and on the unit before starting. If the operator(s) or mechanic(s) can not read English it is the owner’s responsi- bility to explain this material to them.

Become familiar with the safe operation of the equipment, operator controls, and safety signs.

All operators and mechanics should be trained. The owner is responsible for training the users.

Only allow responsible adults, who are familiar with the instructions, to operate the unit.

Never let children or untrained people operate or service the equipment. Local regulations may restrict the age of the operator.

The owner/user can prevent and is responsible for acci- dents or injuries occurring to themselves, other people or property.

PREPARATION

Evaluate the terrain to determine what accessories and attachments are needed to properly and safely perform the job. Use only accessories and attachments approved by the manufacturer.

Wear appropriate clothing including safety shoes, safety glasses and ear protection. Long hair, loose clothing or jew- elry may get tangled in moving parts.

Inspect the area where the equipment is to be used and remove all objects such as rocks, toys and wire, which can be thrown by the machine.

Use extra care when handling gasoline and other fuels. They are flammable and vapors are explosive.

a) Use only an approved container.

b) Never remove fuel cap or add fuel with the engine run- ning. Allow engine to cool before refueling. Do not smoke. c) Never refuel or drain the machine indoors.

Check that operator’s presence controls, safety switches and shields are attached and functioning properly. Do not operate unless they are functioning properly.

OPERATION

Never run an engine in an enclosed area.

Operate only in the daylight or with good artificial light, keeping away from holes and hidden hazards.

Be sure of your footing while using pedestrian controlled equipment, especially when backing up. Walk, don’t run.

Do not operate in reverse unless absolutely necessary. Always look down and behind before and while traveling in reverse.

Be aware of the blower discharge direction and do not point it at anyone. Do not operate the blower without deflec- tors in place.

Never leave a running unit unattended. Always stop engine before leaving unit.

Never operate with guards not securely in place. Be sure all safety features are attached, adjusted properly and func- tioning properly.

Never operate with the discharge deflectors removed or altered.

Do not change the engine governor setting or over speed the engine.

Stop on level ground, shut off engine before leaving the operator’s position for any reason.

Stop equipment and inspect impeller blades after striking objects or abnormal vibration occurs. Make necessary repairs before resuming operations.

Keep hands and feet away intake and discharge areas.

Keep pets and bystanders away.

Do not operate the unit while under the influence of alco- hol or drugs.

Use caution when crossing roads and sidewalks. Stop engine if not blowing.

Use care when loading or unloading the machine into a trailer or truck.

Use care when approaching blind corners, shrubs, trees or other objects that may obscure vision.

SLOPE OPERATION

Slopes are a major factor related to loss-of-control and tip- over accidents, which can result in severe injury or death. All slopes require extra caution. If you cannot back up the slope, or if you feel uneasy on it, do not drive on it.

Do

Blow across the face of slopes; never up and down.

Remove obstacles such as rocks, tree limbs, etc.

Watch for holes, ruts, or bumps. Uneven terrain could over- turn the unit. Tall grass can hide obstacles.

Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction.

Do Not

Do not start or stop on a slope. If tires lose traction, pro- ceed slowly straight down the slope.

Do not turn on slopes unless necessary, and then, turn slowly and gradually downhill, if possible.

Do not use near drop-offs, ditches, or embankments. The operator could lose footing or balance or blower could sud- denly turn over if a wheel is over the edge of a cliff or ditch, or if an edge caves in.

Do not operate on slopes with wet grass. Reduced footing or traction could cause sliding.

Do not use on excessively steep slopes.

3

Image 3
Contents European Walk-Behind Leaf Blower Series Congratulations PreliminariesTraining Safety rules regarding outdoor power equipmentChildren Side AIR Deflector Front Wheel AssemblyHandle Assembly Unit assemblyTo Start Engine Starting the EngineUnit operation Before Starting EngineTo Shut Engine Down Blower OperationGeneral Rules to Observe Before During Operation To Change AIR Discharge DirectionHints for Effective Operation Maintenance GeneralLubrication Unit will not Start TroubleshootingELBC6152BV Illustrated parts listQty Description Throttle CONTROL, B&S Decal identificationEuropean Performance Page McDonough, GA 30253 USA

ELBC6152BV specifications

The Snapper ELBC6152BV is a robust lawn mower designed for homeowners who value both performance and convenience. Powered by a reliable electric motor, this mower offers an eco-friendly alternative to gas-powered models, reducing emissions while still delivering an impressive cutting performance.

One of the standout features of the ELBC6152BV is its innovative brushless motor technology. This technology not only enhances efficiency but also provides a longer lifespan and quieter operation. As a result, users can enjoy a peaceful mowing experience without the disruptive noise often associated with traditional gasoline engines. The electric motor allows for immediate starting with just the push of a button, eliminating the hassle of dealing with pull cords or warm-up times.

The cutting deck of the ELBC6152BV measures 21 inches, making it suitable for various lawn sizes. It is designed with superior aerodynamics that improves cutting performance. The mower also comes equipped with a 3-in-1 cutting system that offers users the flexibility to mulch, bag, or discharge clippings. This versatility ensures that every lawn care need is met, making it easier to maintain a lush and healthy lawn.

Another impressive characteristic of the Snapper ELBC6152BV is its adjustable cutting height. Users can easily switch between multiple height settings to achieve their desired grass length. This feature is particularly beneficial for maintaining different grass types or adapting to changes in the season.

The mower's lightweight design enables easy maneuverability, making it suitable for navigating tight corners and smaller yards. Additionally, it includes a foldable handle for convenient storage. The overall build quality of the ELBC6152BV is commendable, featuring durable materials that withstand regular use while providing reliable performance.

For user convenience, the mower is equipped with an efficient grass collection system that maximizes bag capacity and reduces the frequency of emptying. With its user-friendly design, the Snapper ELBC6152BV is an excellent choice for anyone looking to simplify their lawn care routine, delivering a perfect blend of performance, versatility, and ease of use.