Snapper EP2167517BV important safety instructions Belt Service

Page 16

Section 4 - REPAIR & ADJUSTMENTS

WARNING

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are

4.4.1. Engine Drive Belt Replacement (Stretch Type Belts)

1.Empty the fuel tank.

2.Note the belt routing in Figure 4.15. There is no idler pulley on these models to disconnect. See Figure

HOT. Avoid serious burns, allow sufficient time for all components to cool.

4.3.6.Replacement Of Bearing On Pulley End Of Hex Shaft

To replace the bearing on the pulley end of the hex shaft, proceed as follows:

1. Hold the hex shaft with an adjustable wrench held next to the pulley.

2. Remove the 3/8” hex lock nut which is located on the outside of the right wheel bracket. See Figure 4.14.

3. Remove holder, O-ring and bearing.

4. Install new bearing.

5. Carefully install new O-ring over the outside of the new bearing.

6. Install bearing holder and secure with screws.

7. Install 3/8” hex lock nut.

ENGINE DRIVE PULLEY

DRIVE BELT

DRIVE DISC

BALL BEARING

“O” RING

3/8”

LOCK NUT

BALL BEARING

HOLDER

FIGURE 4.14

4.4BELT SERVICE

On self-propelled mowers, the engine belt transmits power from engine to drive disc. The drive disc powers the poly-v belt which engages the transmission that powers the rear wheels. Should these belts become worn, they could cause slippage which would impair mower performance. The condition of the engine belt and poly-v belt should be checked after every 25 hours of mower operation.

TOP VIEW OF STRETCH TYPE BELT ROUTING

FIGURE 4.15

(Continued On Next Page)

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents European 21 Steel Deck Walk Mowers Series Model Number ExplanationSlope Operation Protection for ChildrenPreparation Maintenance and Storage OperationTable of Contents Familiarization Introduction NomenclaturePRE-START Check List Operating InstructionsStarting & Operation 2.2.1. Engine & Blade Primer Models Cutting Height Adjustment Handle Height AdjustmentPropelling Mower Self Propelled Models OnlyInstallation of Grass Catcher Maintenance Service After First 5 HoursIntroduction Check Grease Level in Transmission Change Engine OILService Annually Storage ProcedureCheck Mower Blade Check Engine Drive BeltRepair & Adjustments Mower Blade Replacement 4.1.1. Standard Blade Wear LimitBlade Sharpening 1.A. Ninja Blade Wear LimitWheel Drive Control Adjustment Driven and Drive Disc Service Driven Disc AdjustmentCleaning Drive Disc & Driven Disc Drive Spring Repair/ReplacementReplacing Rubber Driven Disc Drive Disc Assembly Install NEW Driven Disc Snap Rings Belt Service Pulley Position Troubleshooting Problem Probable Cause Corrective ActionService Performed Each Clean Sponge Element Engine ManualMAINTENANCE/REPLACEMENT Parts 100Decal Identification European Performance Year Limited Warranty Disclaimer of WarrantyPage European Steel Deck Walk Behind Mowers Series

EP2167517BV specifications

The Snapper EP2167517BV is a versatile and reliable lawn mower engineered to tackle various yard sizes with ease. Designed for both homeowners and landscaping professionals, it combines cutting-edge technology with user-friendly features, making it a popular choice among lawn care enthusiasts.

One of the standout features of the Snapper EP2167517BV is its robust 21-inch steel cutting deck. This durable construction provides excellent cutting capability and longevity, ensuring that users can maintain a well-manicured lawn season after season. The mower is equipped with a powerful 163cc engine that delivers ample power for efficient cutting and maneuvering across various terrains. The engine promotes fuel efficiency, enabling longer run times between refueling.

The EP2167517BV features a 3-in-1 cutting system, allowing users to choose between mulching, bagging, or side discharge options. This flexibility enables optimal grass management according to specific yard needs and preferences. The adjustable cutting height, with several positions available, makes it convenient to achieve the desired grass length quickly.

Another notable feature is its innovative self-propelled drive system, which significantly reduces the effort needed to push the mower. This is especially beneficial for larger lawns or slopes, as it allows for smoother navigation without straining the user. The ergonomic handle is designed for comfort and control, making it easy to maneuver the mower around obstacles.

In terms of technology, the Snapper EP2167517BV boasts maintenance-friendly features, such as easy access to the air filter and oil fill. The quick-release folding handlebar simplifies storage, ensuring that the mower occupies minimal space when not in use.

Furthermore, the Snapper brand is known for its commitment to quality and reliability, and the EP2167517BV is no exception. With a reputation for durability, this lawn mower is built to withstand the rigors of regular use, making it an excellent investment for homeowners seeking to enhance their lawn care routine.

In summary, the Snapper EP2167517BV combines a powerful engine, versatile cutting options, user-friendly design, and durable construction into one impressive lawn mowing solution. Its innovative features and dependable performance make it a top choice for maintaining a healthy and attractive lawn.
Top Page Image Contents