DECAL IDENTIFICATION
|
|
|
| FORWARD MOTION |
|
|
| FAST SPEED | |
GROUND |
|
| (RABBIT) | |
SPEED |
|
|
| 3rd TOP SPEED |
DECAL |
|
|
| |
|
|
|
| |
P/N |
|
|
| 2nd MEDIUM SPEED |
|
|
| ||
|
|
|
| |
|
|
|
| 1st SLOW SPEED |
|
|
|
| (TURTLE) |
|
|
|
| |
(7)GROUND SPEED: Shows direction of movement and the ability to select one of three ground speeds by moving the lever. The number 3 (Rabbit) indicates the top speed, number 2 indicates the medium speed and the number 1 (Turtle) indicates the slowest speed.
HEIGHT
CONTROL
DECAL
P/N
(8)HEIGHT CONTROL INSTRUCTION: Shows direction of movement of HEIGHT ADJUST HANDLE to select a change in height if cut from highest cutting height (clockwise) to the lowest height (counter- clockwise). Note that there is a total of eleven heights of cut.
EUROPEAN COMMUNITY DECAL 29776
(10)EUROPEAN PERFORMANCE: Maximum level of vibration measured at the operators hand is 23.4 m/sec2.
OPERATOR PRESENCE
CONTROL DECAL
P/N
(11)OPERATOR PRESENCE CONTROL: Pull control against handle to start engine and blade. Release control to stop engine and blade.
|
| GROUND DRIVE |
EUROPEAN NOISE | DECAL | |
CONTROL DECAL | P/N | |
| 74135 |
|
|
| |
(12) GROUND DRIVE: Pull lever against handle to engage drive. Release lever to disengage drive.
(9)NOISE CONTROL: This unit is certified to be within the 100 dBA sound power limit at the specified Engine RPM.
19