Section 1 - FAMILIARIZATION
HANDLEBAR | BLADE |
CONTROL |
ENGINE
SPEED
CONTROL
WHEEL
DRIVE
CONTROL
ROPE START
HANDLE
SINGLE POINT
HEIGHT OF CUT
ADJUSTING HANDLE
HANDLE BAR
SUPPORT
MOWER DECK
GROUND SPEED
CONTROL
GRASS
CATCHER
DISCHARGE DOOR
OIL FILL/CHECK
FUEL CAP
PRIMER
FIGURE 1.1
1.1 INTRODUCTION
This manual has been prepared for the operators of the SNAPPER WALK BEHIND MOWERS. Its purpose, aside from recommending operating and routine service requirements, is to promote safety through the use of accepted operating practices. Read, Understand and Follow the “IMPORTANT SAFETY INSTRUCTIONS” on Pages 2 & 3 of this manual and all safety messages on the mower and attachments before operating the mower.
1.2 NOMENCLATURE
The nomenclature information above, Figure 1.1, shows the essential parts of the SNAPPER WALK BEHIND MOWERS. It is recommended that all operators of the mower become thoroughly familiar with the controls, parts and operation of the mower before operating. Specific details involving the engine are found in the separate engine owner’s manual. Study these manuals before operating and keep both handy for future reference.
5