Snapper IS2000Zc, IS1500Z Safety Rules & Information, Never operate on slopes greater than 17.6%

Page 4

Safety

Safety Rules & Information

Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. This mowing deck is capable of amputating hands and feet and throwing objects.

The triangle in text signifies important cautions or warnings which must be followed.

GENERAL WARNINGS

Know the mower controls, safety rules and how to stop quickly. READ AND UNDERSTAND THE MOWER OPERATOR’S MANUAL.

Read and obey all safety decals.

Wear appropriate ear, eye and breathing protection.

Only allow responsible adults, who are familiar with the instructions, to operate the unit.

Disengage the electric clutch (PTO). Shut off the engine and wait for all moving parts to stop before attaching, adjusting, or disconnecting any part of the collection system.

Check the collection system to make sure it is bolted tightly to the rider.

DO NOT operate the mower without either the entire grass catcher or the deflector in place.

Turn off the PTO switch to disengage the blades when not mowing.

DO NOT mow in reverse. Always look down and behind before and while travelling in reverse.

DO NOT turn sharply when travelling alongside a building or any object. Slow down before turning.

DO NOT carry passengers on the rider.

When blower assembly is removed from the mower deck, the deflector must be properly installed.

Collector bags are subject to deterioration and wear during normal use. Inspect the bag periodically for tears, holes or weak spots and replace with a new bag that meets manufacturer’s durability standards.

If the mower stalls or the turbo blower chute plugs:

1.Disengage the electric clutch (PTO);

2.Stop the engine and remove the key;

3.Set the parking brake, and wait for all moving parts to stop.

4.Remove the foreign object or clear the chute with a piece of wood before restarting the engine. NEVER place hands into blower housing to clear jammed object. Blower may rotate when object is removed.

For added rider stability and to prevent tipping or loss of control:

a. Use reduced speed on uneven ground and when turning corners.

b. Reduce loads on hillsides. It is recommended that the collection system be kept no more than half full when negotiating any slopes. Start mowing on slopes when the collection system is empty.

c. Mow across the face of slopes; not up and down.

Never operate on slopes greater than 17.6% (10°).

2

www.ferrisindustries.com

Image 4
Contents Manual DescriptionDate Purchased / Fecha Comprada Table of Contents Safety Rules & Information Never operate on slopes greater than 17.6%Safety Decals Safety DecalsAlways wear hearing protection when operating grass catcher General Operating InstructionsBefore Operation Mowing with the Double / Triple CatcherStoring the Grass Catcher After OperationMowing Without the Blower Suspension Adjustment Rear Suspension AdjustmentTo adjust the upper mounting position For IS1500Z & IS2000Z ModelsFor IS2000Z Models with 52 Mower Deck Ball Joint ReplacementTo replace the ball joint Blower Assembly Blower AssemblyPreparing the Mower Deck IS4500Z Models Only Fixed Idler Pulley 8 SAE Washer 8-16 X 2 BoltHere DrillOuter Inner Row Blower Assembly DA BAll Models IS4500Z ModelsHub pointing Mower Deck Preparation Remove the Discharge ChuteRemove the Spindle Belt IS500Z & IS1500Z SeriesIS1000Z Series 52 Model S200X Series IS4500Z SeriesRemove the Spindle Pulley Install the Double Spindle PulleyIS3000ZL Series, IS3100Z Series, & IS4500Z Series Reinstall the Spindle Belt Install the Deck GuardBlower Installation Install Blower On Deck Notice Pin Orientation3/8 8,6 cmInstall Collector Mount Plate Collector Installation1000Z & IS1000Z Series Install Mount Posts & Hitch Pins 8-16 Nylock Flange Nuts Remove the Rear Engine Shield IS3100Z with 4-Tube Rear BumperIS3100Z Series with 4-Tube Rear Bumper IS3100Z Series with 5-Tube Rear BumperInstall Mount Posts & Hitch Pins IS3000Z SeriesS150X & S200X Series Assemble Collector Hood Bag CollectorInstall the Collector Bags Frame Rails Lock Hood Hood Lock Plate Lock PinInstall Hose Weight Mount Installation Install Weight CarrierInstall Weight Carriers Install Weight Mount Rack Hole LocationIS500Z & IS1500Z Series IS2000Z Series IS4500Z Series Installation Blower & Collector Removal Remove the Belt Knob Deck Guard Top Idler Arm LeverReinstall the Discharge Chute Quick Attach Rod Hairpin Clip Reglas E Información De Seguridad Advertencias GeneralesCalcomanías de seguridad Calcomanías DE SeguridadInstrucciones generales de operación Antes DE LA OperaciónPodar CON EL Receptor Doble O Triple No abra la cubierta mientras la podadora está activadaAlmacenar EL Receptor DE Pasto Después DE LA OperaciónPodar SIN EL Soplador Remoción del soplador y receptor Remoción del soplador y receptor FAST-Vac

IS1500Z, IS2000Zc specifications

The Snapper IS1500Z and IS2000Zc are innovative zero-turn riding mowers that epitomize efficiency, performance, and user-friendly design for residential and light commercial applications. These models are particularly renowned for their robust construction, exceptional maneuverability, and advanced features, making them a popular choice among homeowners and landscape professionals alike.

The IS1500Z is powered by a reliable Kohler engine, providing ample power and torque to tackle various mowing tasks with ease. Its cutting deck, typically available in 48 to 52 inches, ensures a clean and precise cut while significantly reducing mowing time. The deck is designed with a strong steel construction, enhancing durability and longevity, an essential factor for any outdoor equipment.

In contrast, the IS2000Zc offers a more powerful engine option, often featuring a commercial-grade engine that enhances performance, especially in tougher mowing conditions. This model is equipped with a larger cutting deck, ranging from 54 to 60 inches, allowing for even greater efficiency while covering larger areas quicker. Both models feature Snapper's signature Instant Response Technology, providing a seamless and responsive driving experience that allows users to navigate around obstacles with precision.

One of the standout characteristics of the IS1500Z and IS2000Zc is the ergonomic seat and controls, which enhance operator comfort during extended mowing sessions. The adjustable seat, coupled with a padded lap bar, ensures that operators can find their ideal position, reducing fatigue and improving overall control of the mower.

These models also boast a simple and accessible maintenance design, featuring easily reachable components and an accessible oil drain. This user-friendly approach allows for quick routine maintenance, thereby extending the life of the mower and ensuring optimal performance.

The IS1500Z and IS2000Zc are designed with a commercial-grade frame construction that provides excellent stability and traction on various terrains. Their large rear tires and articulated front wheels enhance grip and control, making steep inclines and uneven ground less of a challenge.

Overall, Snapper's IS1500Z and IS2000Zc models are exemplary choices for anyone seeking a reliable, efficient, and ergonomic zero-turn mower, equipped with advanced technology that ensures high performance in a variety of mowing conditions. With their combination of power, comfort, and durability, these mowers lead the way in creating a well-manicured lawn with minimal effort.