Snapper IS1500Z, IS2000Zc manual Remove the Rear Engine Shield, IS3100Z with 4-Tube Rear Bumper

Page 23

Remove the Rear Engine Shield

(IS3100Z with 4-Tube Rear Bumper)

1.If the engine is hot, allow sufficient time for the muffler to cool to prevent a burn injury during installation.

2.Remove the rear engine shield (C, Figure 35) from the top of the rear bumper (D) by removing the 3/8” hardware (A, B, & E) securing the shield to the bumper.

Install Collector Mount Plate

(IS3100Z Series with 4-Tube Rear Bumper)

1.Install the collector mount plate (A, Figure 36) on to the bumper. Install two of the 3/8-16 U-bolts

(C) over the top bumper tube and through the mounting plate and loosely secure with the 3/8-16 nylock flange nuts (B).

2.Install the remaining 3/8-16 U-bolt bolt (C) over the third tube down from the top of the bumper and loosely secure with the 3/8-16 nylock flange nuts (B).

3.Center mount plate on the bumper and tighten all the hardware securely.

Install Collector Mount Plate

(IS3100Z Series with 5-Tube Rear Bumper)

1.Install the collector mount plate (A, Figure 37) on to the bumper. Install two of the 3/8-16 U-bolts

(C)over the second tube down from the top of the bumper and through the mounting plate and loosely secure with the 3/8-16 nylock flange nuts

2.Install the remaining 3/8-16 U-bolt bolt (C) over the forth tube down from the top of the bumper and loosely secure with the 3/8-16 nylock flange nuts (B).

3.Center mount plate on the bumper and tighten all the hardware securely.

Collector Installation

A

B

C

D

E

Figure 35. Remove the Rear Engine Shield

A.3/8-16X1” Bolts

B.3/8” Washers

C.Rear Engine Shield

D.Rear Bumper

E.3/8” Nylon Flange Nuts

A C

B

Figure 36. Install Collector Mount Plate

A.Mount Plate

B.3/8-16 Nylock Flange Nuts

C.3/8-16 U-Bolts

A C

B

Figure 37. Install Collector Mount Plate

A.Mount Plate

B.3/8-16 Nylock Flange Nuts

C.3/8-16 U-Bolts

21

GB

Installation

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Description ManualDate Purchased / Fecha Comprada Table of Contents Never operate on slopes greater than 17.6% Safety Rules & InformationSafety Decals Safety DecalsMowing with the Double / Triple Catcher Always wear hearing protection when operating grass catcherGeneral Operating Instructions Before OperationMowing Without the Blower After OperationStoring the Grass Catcher For IS1500Z & IS2000Z Models Suspension AdjustmentRear Suspension Adjustment To adjust the upper mounting positionTo replace the ball joint Ball Joint ReplacementFor IS2000Z Models with 52 Mower Deck Fixed Idler Pulley 8 SAE Washer 8-16 X 2 Bolt Blower AssemblyBlower Assembly Preparing the Mower Deck IS4500Z Models OnlyOuter Inner Row DrillHere DA B Blower AssemblyHub pointing IS4500Z ModelsAll Models IS500Z & IS1500Z Series Mower Deck PreparationRemove the Discharge Chute Remove the Spindle BeltIS1000Z Series 52 Model IS4500Z Series S200X SeriesIS3000ZL Series, IS3100Z Series, & IS4500Z Series Install the Double Spindle PulleyRemove the Spindle Pulley Install the Deck Guard Reinstall the Spindle BeltInstall Blower On Deck Notice Pin Orientation Blower Installation8,6 cm 3/81000Z & IS1000Z Series Collector InstallationInstall Collector Mount Plate Install Mount Posts & Hitch Pins 8-16 Nylock Flange Nuts IS3100Z Series with 5-Tube Rear Bumper Remove the Rear Engine ShieldIS3100Z with 4-Tube Rear Bumper IS3100Z Series with 4-Tube Rear BumperIS3000Z Series Install Mount Posts & Hitch PinsS150X & S200X Series Bag Collector Assemble Collector HoodLock Hood Hood Lock Plate Lock Pin Install the Collector Bags Frame RailsInstall Hose Install Weight Carrier Weight Mount InstallationInstall Weight Carriers Hole Location Install Weight Mount RackIS500Z & IS1500Z Series IS2000Z Series IS4500Z Series Installation Remove the Belt Knob Deck Guard Top Idler Arm Lever Blower & Collector RemovalReinstall the Discharge Chute Quick Attach Rod Hairpin Clip Advertencias Generales Reglas E Información De SeguridadCalcomanías DE Seguridad Calcomanías de seguridadNo abra la cubierta mientras la podadora está activada Instrucciones generales de operaciónAntes DE LA Operación Podar CON EL Receptor Doble O TriplePodar SIN EL Soplador Después DE LA OperaciónAlmacenar EL Receptor DE Pasto Remoción del soplador y receptor Remoción del soplador y receptor FAST-Vac

IS1500Z, IS2000Zc specifications

The Snapper IS1500Z and IS2000Zc are innovative zero-turn riding mowers that epitomize efficiency, performance, and user-friendly design for residential and light commercial applications. These models are particularly renowned for their robust construction, exceptional maneuverability, and advanced features, making them a popular choice among homeowners and landscape professionals alike.

The IS1500Z is powered by a reliable Kohler engine, providing ample power and torque to tackle various mowing tasks with ease. Its cutting deck, typically available in 48 to 52 inches, ensures a clean and precise cut while significantly reducing mowing time. The deck is designed with a strong steel construction, enhancing durability and longevity, an essential factor for any outdoor equipment.

In contrast, the IS2000Zc offers a more powerful engine option, often featuring a commercial-grade engine that enhances performance, especially in tougher mowing conditions. This model is equipped with a larger cutting deck, ranging from 54 to 60 inches, allowing for even greater efficiency while covering larger areas quicker. Both models feature Snapper's signature Instant Response Technology, providing a seamless and responsive driving experience that allows users to navigate around obstacles with precision.

One of the standout characteristics of the IS1500Z and IS2000Zc is the ergonomic seat and controls, which enhance operator comfort during extended mowing sessions. The adjustable seat, coupled with a padded lap bar, ensures that operators can find their ideal position, reducing fatigue and improving overall control of the mower.

These models also boast a simple and accessible maintenance design, featuring easily reachable components and an accessible oil drain. This user-friendly approach allows for quick routine maintenance, thereby extending the life of the mower and ensuring optimal performance.

The IS1500Z and IS2000Zc are designed with a commercial-grade frame construction that provides excellent stability and traction on various terrains. Their large rear tires and articulated front wheels enhance grip and control, making steep inclines and uneven ground less of a challenge.

Overall, Snapper's IS1500Z and IS2000Zc models are exemplary choices for anyone seeking a reliable, efficient, and ergonomic zero-turn mower, equipped with advanced technology that ensures high performance in a variety of mowing conditions. With their combination of power, comfort, and durability, these mowers lead the way in creating a well-manicured lawn with minimal effort.
Top Page Image Contents