Regular Maintenance
LUBRICATION
Lubricate the rider and mower as shown in Figures 11 -
16.When a grease gun is shown, wipe the fitting clean, apply two or three shots of lithium base automotive grease, and wipe off excess grease. When an oil can is shown, wipe the area clean, apply a few drops of oil (SAE 30), then wipe up drips or spills.
*2388B
Figure 11. Brake Pedal Pivot Point
*2390
Figure 12. Front Axle Lubrication Points
*2397
Figure 13. Mower Deck Lubrication Points
Figure 14. Rider Lubrication Points - Rear Half (Gear Model Shown)
Figure 15. Rider Lubrication Points - Front Half
Note: On 30” mower, grease fitting is on topside of deck.
Figure 16. Arbor Lubrication Points
22