Snapper SPLH151KW, SP400, SP300, SPLH221KWE, SPLH171KW, SPLH141KWE Operation, Maintenance

Page 3

IMPORTANT SAFETY INSTRUCTIONS

OPERATION

1.DO NOT put hands or feet near or under rotating parts. Keep clear of the discharge area while the engine is running.

2.Stop Blades when crossing gravel drive, walks, and under any conditions where thrown objects might be a hazard.

3.Mow only in daylight or good artificial light.

4.DO NOT operate the machine while under the influence of alcohol or drugs.

5.After striking a foreign object or if the mower vibrates abnormally, STOP the blades and engine. Remove the key. Disconnect and secure the spark plug wire. Inspect the mower for any damage and repair the damage.

6.DO NOT operate machine near drop offs, ditches, or embankments. Operator could lose footing or balance.

7.STAY ALERT for holes and other hidden hazards. Tall grass can hide obstacles. Keep away from ditches, washouts, culverts, fences and protruding objects.

8.DO NOT operate machine on wet grass. Always be sure of your footing: keep a firm grip on the handle and walk: never run. Slipping could cause injury.

9.DO NOT leave the machine with the engine running. STOP BLADES, STOP ENGINE and REMOVE KEY before leaving the operator position for any reason.

10.Before cleaning, repairing, or inspecting make certain blades, engine and all moving parts have STOPPED. Remove key and secure spark plug wire away from spark plug key to prevent accidental starting.

11.STOP BLADES and ENGINE and make sure blades have stopped before removing grass catcher or unclogging mower to prevent loss of fingers or hand.

12.Blades must be OFF except when cutting grass. Set blades in highest position when mowing over rough ground.

13.Keep hands and feet away from rotating blades underneath deck.

14.DO NOT operate machine without entire grass catcher or guards in place. DO NOT point discharge at people, passing cars, windows or doors.

15.Slow down before turning.

16.Watch out for traffic when near or crossing roadways.

17.Move motion control levers SLOWLY to maintain control during speed and directional changes.

18.DO NOT operate engine in enclosed areas. Engine exhaust gases contain carbon monoxide, a deadly poison.

MAINTENANCE

1.DO NOT store machine or fuel container inside where fumes may reach an open flame, spark or pilot light such as in a water heater, furnace, clothes dryer or other gas appliance. Allow engine to cool before storing machine in an enclosure. Store fuel container out of the reach of children in a well ventilated, unoccupied building.

2.Keep engine free of grass, leaves or excess grease to reduce fire hazard and engine overheating.

3.When draining fuel tank, drain fuel into an approved container outdoors and away from open flame.

4.Check brakes frequently (if equipped); adjust, repair or replace as needed.

5.Keep all bolts, nuts and screws properly tight. Check that all cotter pins are in proper position.

6.Always provide adequate ventilation when running engine. Exhaust gases contain carbon monoxide, an odorless and deadly poison.

7.Disconnect negative (black) cable from battery (if equipped) before performing maintenance or service. Cranking engine could cause injury.

8.DO NOT work under machine without safety blocks.

9.Service engine and make adjustments only when engine is stopped. Remove key. Remove spark plug wire(s) from spark plug(s) and secure wire(s) away from spark plug(s).

10.DO NOT change engine governor speed settings or overspeed engine.

11.Lubricate machine at intervals specified in manual to prevent controls from binding.

12.Mower blades are sharp and can cut. Wrap the blades or wear heavy leather gloves and use CAUTION when handling them.

13.DO NOT test for spark by grounding spark plug next to spark plug hole; spark plug could ignite gas exiting engine.

14.Have machine serviced by an authorized SNAPPER dealer at least once a year and have the dealer install any new safety devices.

15.Use only genuine SNAPPER replacement parts to assure that original standards are maintained.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Model Number Explanation PRO Hydro Walk Behind Mowers MID-SIZE SeriesPreparation Important Safety InstructionsProtection for Children Slope OperationOperation MaintenanceTable of Contents Familiarization IntroductionNomenclature Controls Engine ControlsBlade and Traction Controls PRE-START Checklist Operating InstructionsBefore Operating Starting and Operating StoppingReverse Speed Traction Speed ControlMower Operation Forward SpeedOn Next Handle Height AdjustmentMowing and Turning on Hillsides PreviousFrom previous Fixed Decks Cutting Height AdjustmentAdjusting Caster Wheels Adjusting Blade on Cutter SpindleSide Profile of Machine Adjusting Fixed Deck AttachmentSymptom Problem Solution Engine TroubleshootingHydraulic Filter Service & Lubrication InformationGrease Grease Zerk Location Daily Weekly Hours Procedure CommentsService Electric Clutch AdjustmentHydraulic System Adjustments Service To Change Machine Speed Ranges Hydraulic Pump Belt InstallationReplacement Parts Machine Speed Control RangesTraction Control Neutral Adjustment 4 , 52, & 61 Cutting Deck Belt Installation Mower Attachment ServiceCutter Deck Belt Removal & Installation Cutting Deck Belt InstallationBlade Removal and Sharpening Cutting Blade ServiceStandard Blade Replacement Deck 9246 9247 9251Bearing Replacement Mower Spindles Field Serviceable SpindlesBattery Testing Battery RemovalBattery Installation Battery ServiceDo not Overfill NEW Battery PreparationDisclaimer of Warranty Year Limited WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Service Notes Service Notes PRO Hydro MID-SIZE Walk Behind Mowers Series

SPLH141KW, SPLH151KW, SPLH141KWE, SPLH171KW, SP400 specifications

The Snapper SP300, SPLH221KWE, SP400, SPLH171KW, and SPLH141KWE represent a range of high-performance lawn mowers designed to meet the diverse needs of homeowners and landscape professionals alike. Each model comes equipped with distinct features and technologies that enhance functionality, efficiency, and user experience.

Starting with the Snapper SP300, this robust walk-behind mower is powered by a reliable engine that delivers ample power for tackling various grass types and conditions. Its innovative cutting system includes a tough steel deck that ensures durability while providing a clean cut every time. The SP300 also boasts adjustable cutting height settings, allowing users to customize their lawn mowing to achieve the desired grass length.

The SPLH221KWE is designed for those who prioritize convenience and advanced technology. This model features a self-propelled drive system, making it easier to maneuver on different terrains. The electric start function enhances usability, eliminating the need for pull cords. This mower is equipped with a mulching capability, allowing clippings to be finely chopped and returned to the lawn as organic fertilizer.

Next is the Snapper SP400, which is built for efficiency and power. Featuring a larger cutting deck, this mower can cover more ground in less time. Its high-performance engine ensures steady power delivery even in tough mowing conditions. The SP400 also includes a bagging system that effectively collects grass clippings, promoting a neat and tidy lawn finish.

The SPLH171KW is a compact yet powerful option, perfect for smaller yards or tight spaces. Despite its size, it does not compromise on features, as it supports height adjustments and comes with a durable blade that provides precision cutting. This model is designed for easy storage, making it suitable for homeowners with limited garage space.

Finally, the SPLH141KWE combines lightweight design with powerful performance. This mower is ideally suited for those who prefer a user-friendly experience without compromising on results. With its easy-start technology and adjustable speed settings, users can operate the mower comfortably across different lawn conditions.

When considering these Snapper models, it's important to note that they are all engineered with user comfort in mind, featuring comfortable grips, intuitive controls, and minimal maintenance requirements. With a focus on ease of use, performance, and longevity, Snapper mowers are a valuable investment for maintaining a pristine lawn. Whether you choose the SP300, SPLH221KWE, SP400, SPLH171KW, or SPLH141KWE, you can expect exceptional quality and results.
Top Page Image Contents