Snapper SP2265, S2265, SPV22675HW, NS2265, NSPV22675HW Preparation, Unpacking, Handle

Page 6

Preparation

Preparation

WARNING: Before doing any assembly or maintenance to the mower, remove the wire from the spark plug.

NOTE: In this instruction book, left and right describe the location of a part with the operator standing behind the handle.

Unpacking

The mower was fully assembled at the factory. When the mower was put in the carton, the handle was put in the storage position. To put the handle in the operating position, follow the steps below.

Handle

1.Remove the mower from the carton.

2.Remove all packing material from the mower and the handle.

3.Turn the knobs (A, Figure 1) on either side of the lower handle (B) to retract the locking pins. Raise the lower handle, aligning it with one of the three sets of holes in the handle brackets (C). Turn the knobs to release the locking pins and secure the lower handle.

4.Put the upper handle (A, Figure 2) in the operating (upright) position. Tighten the wingnuts (B).

NOTE: The height of the handle can be set for operator comfort. See “Handle Height”.

CAUTION: Be careful when you fold or raise the handle. Do not damage the cables. A cable that is bent will not work correctly. Before you use the unit, replace a bent or damaged cable.

5.Hold the engine stop lever against the handle. (Refer to section entitled ‘Engine Stop Lever’.) Slowly pull the recoil-start grip (A, Figure 3). To attach the recoil-start grip to the rope guide (B), twist the rope through the rope guide mounted on the right side of the handle.

C

B

A

Figure 1: Unfolding the lower handle

A

B

Figure 2: Unfolding the upper handle

A

B

Figure 3: Attaching the recoil-start grip

4

www.snapper.com

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Walk Behind Mowers Date of Purchase Retailer Retailers Phone Number Equipment EngineTable of Contents Preparation Protection for ChildrenSlope Operation Preparation From Previous ColumnOperation Maintenance and StorageSafe Handling of Gasoline From Previous Operation From Previous ColumnPreparation UnpackingHandle Adjusting the handle height Handle HeightInstalling the frame assembly Assembling the Grass BagMounting the Grass Bag Emptying the Grass BagAttaching the Side Mounted Discharge Deflector Mulching Tips Preparing the EngineFinal Preparation Front Wheel Drive System Self-Propelled Units Only OperationEngine Stop Lever Stopping the EngineStarting the Engine Rules for Safe and Effective OperationCleaning the Mower Housing MaintenanceEngine Maintenance Engine TippingRemoving the Drive Belt Self-Propelled Units Only Removing the belt coverAdjusting the Drive Cable Self-Propelled Units Only Adjusting the drive cableSharpening the Blade Blade ServiceRemoving the Blade Checking the Level of CutPreparing the Mower for Storage Sharpening the bladeTroubleshooting Year Limited Warranty Slope Guide Page Page Product Specifications Common Service Parts

SP2265, S2265, SPV22675HW, NS2265, NSPV22675HW, S22675, SP22675, SPV22675HW, NS22675, NSP22675, NSPV22675HW specifications

The Snapper S22675, SP22675, and their variants like SPV22675HW, NS22675, NSP22675, NSPV22675HW, SP2265, S2265, SPV22675HW, NS2265, and NSPV22675HW represent a significant range of power equipment designed for lawn maintenance and landscaping. These models are particularly popular for their performance, durability, and user-friendly features tailored for both amateur gardeners and professional landscapers.

One of the key features of the Snapper S22675 series is its powerful engine. Designed for efficiency, these mowers often come equipped with high-performance Briggs & Stratton engines, ensuring robust power output while maintaining fuel economy. This makes them ideal for cutting through thick grass and tackling various terrain types with ease.

Another standout characteristic is the engineering of the cutting deck. The cutting decks in Snapper mowers are constructed for optimal airflow, which enhances grass clipping distribution and ensures a clean finish. Users can expect an even cut thanks to the innovative design that minimizes clumping, a common issue when mowing wet or lush grass.

The Snapper lineup also emphasizes user convenience. Models like the SP22675 and SPV22675HW often include self-propulsion features that allow for easy maneuverability across large lawns, reducing the physical effort required by the operator. The variable speed transmission system enables users to adjust the speed to their walking pace, making it adaptable for various user preferences and conditions.

Additionally, several models in the Snapper S22675 series feature adjustable cutting heights. This allows users to customize their mowing experience based on seasonal grass growth or specific lawn care requirements. The adjustment mechanism is designed for quick changes, enabling users to optimize their cut effortlessly.

Durability is yet another hallmark of the Snapper brand. The construction materials are selected not just for their strength but also for weather resistance, ensuring that the mowers can withstand various conditions without compromising performance. This is particularly advantageous for those who use their mowers frequently or in challenging environments.

In conclusion, Snapper's S22675 series and its associated models stand out for their powerful engines, innovative cutting deck designs, user-friendly features, and robust durability. These characteristics culminate in a mowing experience that meets the needs of a diverse range of users, from casual lawn caretakers to professional landscapers, making them a trusted choice in outdoor power equipment.
Top Page Image Contents