Snapper SFH13320KW Check Tire Pressure, See Before Every Spring, Fall

Regular

Maintenance

MAINTENANCE SCHEDULE & PROCEDURES

The following schedule should be followed for normal care of your rider and mower. You will need to keep a record of your operating time. Determining operating time is easily accomplished by multiplying the time it takes to do one job by the number of times you’ve done the job, or you can install an hour meter.

	See	Before	Before	Every	Every	Every	Spring
SAFETY ITEMS	Page	First Use	Each Use	5 Hours	25 Hours	100 Hours	& Fall
Check Safety Interlock System	7	●					●
Check Mower Blade Stopping Time	22	●				●
	See	Before	Before	Every	Every	Every	Spring
NORMAL CARE ITEMS	Page	First Use	Each Use	5 Hours	25 Hours	100 Hours	& Fall
Check Mower for loose hardware	—		●	●
Check Engine Oil Level	13*	●	●	●			●
Check Engine Air Filter	13*		●			***●
Change Engine Oil & Filter **	13*				***● Every 50 Hours		***●
Lubricate Mower	14					***●
Check Tire Pressure	12	●				***●
Check Fuel Filter	13					●
Clean & Sharpen Mower Blades	15					●
Inspect Spark Plug	13*					●

*See the engine manufacturer's owner's manual.

**Change original engine oil after first 5 hours of operation.

***More often in hot (over 85° F: 30° C) weather or dusty operating conditions.

CHECK TIRE PRESSURE

Tire Pressure should be checked periodically, and main- tained at the levels shown in the chart. Note that these pressures may differ slightly from the “Max Inflation” stamped on the side-wall of the tires. The pressures shown provide proper traction, improve cut quality, and extend tire life.

Tire	Pressure
Front	25 psi (1,72 bar)
Rear	15 psi (1,03 bar)	Figure 3. Checking Tire Pressure

00

12