Snapper SGV13320KW manual Discharge Deflector Assembly, Transmission Shift Lever Assembly

3 unit assembly (cont.)

DISCHARGE DEFLECTOR ASSEMBLY

•Attach discharge deflector (1:5) using two 5/16" x ¾" bolts and lock nuts (1:6-7). CAUTION: Do not over tighten lock nuts.

TRANSMISSION SHIFT LEVER ASSEMBLY

•Install Shift indicator panel (2:45) onto rear of engine deck (2:1) with two 5/16 x 3/4” hex bolts (2:47), securing with large serrated flange nuts (2:48). Leave hardware finger tight.

•Remove 3/8” nylon lock nut and flat washer (2:43,44) from shift stud atop transmission (2:14 – location ‘A’).

•Remove 1/2 x 2-1/2” hex bolt, three oillite washers, and lock nut (2:40-42) from top rear of engine deck.

•Insert same 1/2” bolt down through top forward hole in Shift lever (2:38), slip same three washers up onto threads of bolt, then drop bolt into same hole.

GVTP SM32-R0303.1