Inputs Input Channel A&B

PIN 1: SHIELD

PIN 2: a, +

PIN 3: b, -

With an input sensitivity of 775 mV = 0 dBu and an input impedance of 20 k ohms, the electronically balanced inputs – INPUT CHANNEL A&B – are meant for the connection of control amplifiers, audio controllers, mixing consoles, etc.

Peripheral pieces of audio equipment are either connected via the XLR- type input connectors or using the parallel-linked binding posts. For the latter option you can utilize the supplied screw-plugs. Thus, carrying the audio signals through to feed additional power amplifiers can be conveni- ently achieved without the need for special split-cables.

The XLR-type input connectors’ pin-assignment is in accordance to the IEC 268 standard:

In case the controlling device does not supply balanced output connectors, it is also possible to configure the connectors for unbalanced operation. Therefore, the common ground (pin 1) has to be connected to the (–) input (pin 3). The audio signal is now solely fed through the (+) input (pin 2).

So, to be able to entirely make use of all the advantages the electronically balanced input stage offers – like the suppression of humming and interference noise – it is beneficial to re-establish balanced input connec- tion whenever possible.

In case floating inputs are needed, the inputs are ready to be retrofitted with input transformers; one optional available extension kit NRS 90208 (308840) per channel is necessary.

Instructions On How To Install NRS 90208 Extension Kits

∙unplug the power amplifier from the mains

∙detach all screws holding the cover plate of the appliance

∙lift and remove the cover plate

∙disconnect the flat-wire cable of the printed board assembly 81340/1

∙detach all screws holding the printed board assembly 81340/1

∙remove the printed board assembly 81340/1 and unsolder the resistors R106 … R109

∙attach insulators to the input transformers according to the corespondent marks on the printed board assembly

∙re-assemble the appliance by performing all steps described in the opposite order

DPA 4260, DPA 4245 specifications

Dynacord, a renowned name in professional audio equipment, has established a reputation for delivering high-performance amplifiers that meet the rigorous demands of live sound and installation applications. The DPA 4260 and DPA 4245 models stand out in their lineup, featuring advanced technologies and robust characteristics that set them apart in the competitive audio landscape.

The Dynacord DPA 4260 is a powerful four-channel amplifier that offers an impressive output of up to 2,600 watts, designed to drive a wide range of speakers effortlessly. One of its main features is the implementation of a sophisticated DSP (Digital Signal Processing) technology, which provides comprehensive control over audio parameters such as EQ, crossover, delay, and limiter settings. This allows users to optimize the sound output for various environments, ensuring clarity and fidelity in the audio performance.

In addition to DSP, the DPA 4260 is equipped with an advanced Power Factor Correction (PFC) system. This technology not only enhances the amplifier's efficiency but also ensures stable performance even under varying load conditions. The amplifier's robust build quality and efficient heat dissipation design make it suitable for extended operation in demanding venues.

On the other hand, the Dynacord DPA 4245 is another impressive model offering a slightly lower output of 1,400 watts but packed with its unique set of features. Like the DPA 4260, it benefits from the same DSP capabilities, allowing for detailed sound manipulation and tuning. This is particularly useful for sound engineers looking for precision in their audio setups.

The DPA 4245 also showcases versatility in its operation, featuring a selection of operating modes to accommodate different configurations, including bridge mode for driving larger loads. Its lightweight design makes it easy to transport and install without compromising on power or performance.

Both models come with comprehensive connectivity options, ensuring compatibility with various audio systems and setups, facilitating seamless integration into existing infrastructures. The front panel allows for easy monitoring, featuring LED indicators that display operational status and signal integrity.

In conclusion, Dynacord's DPA 4260 and DPA 4245 amplifiers exemplify cutting-edge technology and robust construction in the world of professional audio. With their powerful outputs, advanced DSP capabilities, and flexible configurations, these amplifiers are designed to meet the demands of professionals seeking reliable and high-quality audio solutions in live sound reinforcement and installation applications. Whether for touring, installations, or events, these amplifiers ensure a professional sound experience.