Snapper RZT22500BVE2, RZT20440BVE2 manual Engine, Chassis, Transmissions, Dimensions

Page 34

Specifications

NOTE: Specifications are correct at time of printing and are subject to change without notice.

* Actual sustained equipment horsepower will likely be lower due to operating limitations and environmental factors.

ENGINE:

20 HP* Briggs & Stratton

Make

Briggs & Stratton

Model

20 hp Intek

Horsepower

20 @ 3500 rpm

Displacement

40.0 Cu. in (656 cc)

Electrical System

12 Volt, 16 amp. Alternator, Battery: 230 CCA

Oil Capacity

64 Oz. (1.9 L) w/ Filter

22 HP* Briggs & Stratton

Make

Briggs & Stratton

Model

22 hp Intek

Horsepower

22 @ 3550 rpm

Displacement

40.0 Cu. in (656 cc)

Electrical System

12 Volt, 16 amp. Alternator, Battery: 230 CCA

Oil Capacity

64 Oz. (1.9 L) w/ Filter

CHASSIS:

Fuel Tank

Capacity: 3.0 Gallons (11.4 L)

Rear Wheels

Tire Size: 18 x 8.50-8

 

Inflation Pressure: 15 psi (1,03 bar)

Front Wheels

Tire Size: 11 x 4.00-5

 

Inflation Pressure: 25 psi (1,72 bar)

Engine Power Rating Information

TRANSMISSIONS:

Hydro-Gear

ZA-DHBB-2D5A-2DCX (LH)

ZA-AHBB-2D5A-2DCX (RH)

Type

EZT

Hydraulic Fluid

Sealed Unit

Speeds

Forward: 0-6.2 MPH (0-9.98 km/h)

@ Specified rpm

Reverse: 0-3 MPH (0-4.83 km/h)

Continuous Torque

115 ft. lbs. (155 N.m.)

Output

 

Maximum Weight

340 lbs. (154 Kg) per Axle

on Axle

 

DIMENSIONS:

Overall Length

72” (182,9 cm)

Overall Width

 

 

With 44” Mower Deck

55” (139,7 cm)

With 50” Mower Deck

58”

(147,3 cm)

Height

38”

(96,5 cm)

Weight (apx.)

 

With 44” Mower Deck

623 lbs. (283 kg)

With 50” Mower Deck (Simplicity)

638 lbs. (290 kg)

With 50” Mower Deck (Snapper)

622 lbs. (282 kg)

The gross power rating labels for individual gas engine models meet or exceed SAE (Society of Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure) and rating performance has been obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Actual gross engine power may be lower and is affected by, but not limited to, ambient operating conditions and engine to engine variability. Given both the wide array of products on which engines are placed, and the variety of environmental issues applicable to operating the equip- ment, the gas engine will not develop the rated gross power when used in a given piece of power equipment (actual “on-site” or net horsepower). This difference is due to a variety of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine to engine variability.

33

Image 34
Contents OPERATOR’S Manual Table of Contents Safety Rules & Information Safety Rules and Information From PreviousTowing Models Identification NumbersSnapper SimplicitySafety Decals Safety DecalsSafety Interlock System Operational Safety ChecksMotion Control Levers Control FunctionsChoke Features & Controls General Operating Safety Checks Before StartingStopping the Rider & Engine OperationStarting the Engine MowingForward Travel Practice Zero Turn Driving PracticeSmooth Travel Reverse Travel PracticePractice Turning Around a Corner Executing an End-Of-Row Zero TurnAttaching a Trailer Mower Removal InstallationRemoval Installation Regular Maintenance Before Every Spring Each Hours 100 250 Fall UseRegular Maintenance LubricationService Interval Every 10 Hours or As Required Servicing the Mower BladesChecking / Adding Fuel Engine MaintenanceCheck Tire Pressures Fuel FilterCleaning the Battery and Cables Battery MaintenanceStorage Troubleshooting, Adjustments, & Service Troubleshooting the RiderTroubleshooting, Adjustments, & Service Troubleshooting the MowerSpeed Balancing Adjustment Seat AdjustmentsMotion Control Lever Adjustment Seat Position AdjustmentCutting Height Adjustment Motion Control Lever Friction AdjustmentRoller BAR Adjustment Neutral Adjustments Front Suspension Adjustment Select Models Parking Brake AdjustmentBrake Adjustment PTO Clutch Adjustment Blade Brake CheckMower Deck Leveling Orient Blades Side-to-SideRoller BAR Leveling Deck Timing ROD AdjustmentIf Equipped Transmission Drive Belt Replacement Battery ChargingMower Belt Replacement PRY Belts Over PulleysFuse Replacement Chassis DimensionsEngine TransmissionsMaintenance Items Replacement PartsTechnical Manuals

RZT20440BVE2, RZT22500BVE2 specifications

The Snapper RZT22500BVE2 and RZT20440BVE2 are innovative riding mowers that exemplify the cutting-edge features and technologies available in modern lawn care equipment. These models are designed to enhance user experience, improve efficiency, and deliver exceptional cutting performance for residential and commercial users alike.

The Snapper RZT22500BVE2 is powered by a robust 25 HP Briggs & Stratton Intek V-twin engine. This powerful engine enables the mower to handle tough grass types and navigate challenging terrain with ease. Coupled with a 48-inch stamped steel cutting deck, this mower offers a smooth and precise cut, ensuring a professionally manicured lawn in a fraction of the time. The RZT22500BVE2 is equipped with Snapper's patented Infinite Speed Control, allowing users to adjust their speed effortlessly, making it easy to maneuver around obstacles or tackle tight corners.

On the other hand, the RZT20440BVE2 features a 20 HP Briggs & Stratton engine that provides ample power for regular mowing activities. With a slightly smaller yet equally efficient 42-inch cutting deck, this model is perfect for users with smaller properties or tighter spaces. The RZT20440BVE2 also boasts Instant Response Control, making it incredibly user-friendly by offering smooth transitions in speed and direction.

Both models incorporate the latest in technology to enhance the mowing experience. The dual hydrostatic transmission system in these riding mowers delivers seamless control, allowing users to drive forward or reverse with ease, without compromising power. An ergonomic seat design provides comfort during extended mowing sessions, reducing fatigue.

Additionally, both models come with a clean-out port, enabling easy maintenance of the cutting deck by allowing users to wash grass clippings away after each use. They also feature durable, heavy-duty construction, ensuring longevity and reliability in various weather conditions.

In conclusion, the Snapper RZT22500BVE2 and RZT20440BVE2 are excellent choices for lawn care enthusiasts looking for powerful, efficient, and user-friendly riding mowers. With their advanced features and reliable performance, these models stand out in the market, making lawn maintenance easier and more enjoyable. Whether you opt for the power of the RZT22500BVE2 or the compact efficiency of the RZT20440BVE2, both offer outstanding value and superior performance for all your mowing needs.