Snapper XL Series manual SET Mower Belt Tension, Safety Interlock System Check, Blade Brake Check

Page 27

SET MOWER BELT TENSION

WARNING

For your personal safety, do not handle the sharp mower blades with bare hands. Careless or improper handling of blades may result in serious injury.

Service Interval: Yearly

1.Turn the PTO to the off position, engage the parking brake, turn the engine off, and remove the key. Remove the mower deck (see “Mower deck removal”).

2.Remove the screws securing the belt covers. Remove the belt covers.

3.Loosen the idler assembly capscrew (B, Figure 27).

4.Using a 3/8" drive ratchet and extension (D), move the spring-loaded idler assembly (A) to relieve ten- sion on the belt (C).

5.Remove the belt (C) and inspect it for cracks, missing teeth and wear. Replace belt if worn or damaged.

6.Reinstall the belt (C). Releasing the idler assembly

(B) allows the spring to automatically tension the cogged belt.

7.Tighten the idler assembly capscrew (B) and reinstall the belt covers.

Regular Maintenance

D

A

B

C

Figure 27. Mower Belt Tension

A.

3/8” Square Hole

C. Arbor Drive Belt

B.

Pulley Capscrew

D. Ratchet

SAFETY INTERLOCK SYSTEM CHECK

Service Interval: Every Fall & Spring

Check the function of the safety interlock system using the test procedure found on page 7 of this manual. If the tractor fails any of the tests, see your dealer.

BLADE BRAKE CHECK

Service Interval: Every 100 Hours or Fall & Spring

Mower blades and mower drive belt should come to a complete stop within five seconds after electric PTO switch is turned off.

1.With tractor in neutral, PTO disengaged and operator in seat, start the engine.

2.Look over the left-hand footrest at the mower drive belt. Engage the PTO and wait several seconds. Disengage the PTO and check the amount of time it takes for the mower drive belt to stop.

3.If mower drive belt does not stop within five seconds, re-adjust the clutch or see your dealer.

PTO CLUTCH ADJUSTMENT CHECK

Service Interval: After 25 Hrs, Then Every 250 Hrs

Check the PTO clutch adjustment after every 250 hours of operation–or if the clutch starts slipping or will not engage. Check and adjust the clutch using the proce- dure outlined in the Adjustments section of this manual.

ENGINE MAINTENANCE

Refer to the engine owner’s manual for all engine main- tenance procedures and recommendations.

25

Image 27
Contents 20HP Hydro Tractors 18HP Hydro Tractors Mower DecksPage Table of Contents Safety Rules & Information Operating Safety Slope Operation Safety Rules and InformationGeneral Operation Safety Rules & InformationIgnition System Safe Handling of Gasoline Service & MaintenanceModels Identification NumbersCE Identification TAG Markings North AmericanCE Models Safety DecalsSafety Decals North American Models ALL ModelsOperational Safety Checks Safety IconsBrake Pedal Throttle/Choke ControlThrottle Control Hour Meter OptionalFeatures & Controls General Operating Safety Adding FuelStopping the Tractor & Engine Operating the Tractor Rear Deflector Installation & RemovalParking Brake Function Emptying the CatcherAdjusting the Deflector Attaching a TrailerStorage Mower Deck Removal Installation Removing the Mower DeckMuffler and surrounding areas may be hot Installing the Mower Deck Catcher Removal InstallationInstall Mulch Plug Discharge Mulch Plug Installation & Removal Some ModelsPage Fall Before Every SpringCheck Tire Pressures Regular MaintenanceTransmission Maintenance Battery MaintenanceOil LubricationLubricate Rear Axle Shafts Service Interval YearlyServicing the Mower Blades Check Mower Blade Timing4x4 Wood Block SET Mower Belt Tension Safety Interlock System CheckPTO Clutch Adjustment Check Engine MaintenanceTroubleshooting, Adjustments, & Service Troubleshooting the Mower Seat Slide Adjustment Seat AdjustmentHopper Latch Adjustment Pitch AdjustmentNuts Steering Gear AdjustmentBrake Adjustment Adjustment NutBattery Charging Troubleshooting, Adjustment, & ServiceCATCHER-FULL Alarm Adjustment Mower Lift AdjustmentAdjust PTO Clutch Window Adjustment Nut Feeler Gauge PTO Clutch AdjustmentTransmission Release Lever Transmission PurgingMower Adjustments Cutting Height AdjustmentLeveling The Mower Arbor Drive Belt Replacement PTO Belt ReplacementChassis DimensionsEngine TransmissionTechnical Manuals Replacement PartsMaintenance Items Optional AccessoriesPage O D U C T S

XL Series specifications

The Snapper XL Series is a cutting-edge line of outdoor power equipment designed for efficiency, durability, and ease of use. Aimed at both residential and commercial users, the Snapper XL Series stands out in its category for its advanced technologies and impressive features.

One of the standout features of the Snapper XL Series is its powerful engine options. Equipped with robust, high-performance engines, these machines offer excellent torque and acceleration, making them capable of handling tough mowing conditions. Users can choose between gas and battery-powered models, catering to various preferences and requirements for energy efficiency and sustainability.

The Snapper XL Series is designed with user comfort in mind. The ergonomic controls ensure that operators can easily navigate the equipment, reducing fatigue during extended use. Enhanced seat design with adjustable settings is also a highlight, ensuring that users of all sizes can find a comfortable and supportive position while mowing.

Another key characteristic of the Snapper XL Series is its innovative cutting technology. The series employs a unique cutting deck design that enhances airflow, providing a superior cut quality while promoting even grass distribution. This results in a professional finish, reducing the need for multiple passes over the same area.

Durability is a hallmark of the Snapper XL Series. Crafted from high-quality materials, these machines are built to withstand the rigors of outdoor use. The reinforced frames and heavy-duty components ensure longevity and dependability, making them a worthwhile investment for home and business owners alike.

The Snapper XL Series also includes a range of advanced safety features. These include automatic shut-off systems and operator presence controls, which help to prevent accidents and enhance user security.

In addition, the ease of maintenance is a major consideration in the design of the Snapper XL Series. With accessible engine components and user-friendly maintenance schedules, users can perform routine checks and servicing without hassle.

Moreover, technology integration allows for enhanced user experience, with some models featuring LED lights for better visibility during early morning or late evening tasks.

In conclusion, the Snapper XL Series combines power, comfort, and superior technology, making it an ideal choice for anyone looking for reliable outdoor equipment. Whether for residential lawns or large commercial properties, the Snapper XL Series proves to be a versatile solution to meet various gardening and landscaping needs.