Snapper XL Series Steering Gear Adjustment, Brake Adjustment, Nuts, Brake Spring, Adjustment Nut

Page 31

Troubleshooting, Adjustment, & Service

STEERING GEAR ADJUSTMENT

If there is excessive slack in the steering system, the steering gear backlash can be removed.

1.See Figure 30. Locate the steering gear assembly on the underside of the tractor. Loosen the two nuts and adjust the bracket so the gear teeth are closely meshed.

2.Tighten nuts to 36-44 ft. lbs. (49-59 Nm) after adjust- ment.

Nuts

Figure 30. Steering Gear Adjustment

BRAKE ADJUSTMENT

 

1. Disengage the PTO, stop the engine, block the

 

wheels, remove the ignition key, and engage the

 

parking brake.

 

2. Remove the mower deck (see Mower Deck

 

Removal).

 

3. Locate the brake spring (A, Figure 31) and adjust-

 

ment nut (B).

B

4. With the parking brake engaged, measure the com-

A

pressed spring length. The spring should be 2-1/2”

 

(6,4 cm) when compressed.

 

If the spring is not within this range, turn the adjust-

 

ment nut (B, Figure 31) to compress or release the

 

spring.

 

If this adjustment does not correct a braking problem,

 

see your dealer.

 

 

Figure 31. Brake Spring Adjustment

 

A. Brake Spring

 

B. Adjustment Nut

29

Page 30 Page 32
Image 31
Page 30 Page 32
Contents 20HP Hydro Tractors 18HP Hydro Tractors Mower DecksPage Table of Contents Safety Rules & Information Operating Safety Slope Operation Safety Rules and InformationGeneral Operation Safety Rules & InformationIgnition System Safe Handling of Gasoline Service & MaintenanceModels Identification NumbersCE Identification TAG Markings North AmericanCE Models Safety DecalsSafety Decals North American Models ALL ModelsOperational Safety Checks Safety IconsBrake Pedal Throttle/Choke ControlThrottle Control Hour Meter OptionalFeatures & Controls Adding Fuel General Operating SafetyStopping the Tractor & Engine Operating the Tractor Rear Deflector Installation & RemovalParking Brake Function Emptying the CatcherAttaching a Trailer Adjusting the DeflectorStorage Removing the Mower Deck Mower Deck Removal InstallationMuffler and surrounding areas may be hot Installing the Mower Deck Catcher Removal InstallationInstall Mulch Plug Discharge Mulch Plug Installation & Removal Some ModelsPage Fall Before Every SpringCheck Tire Pressures Regular MaintenanceTransmission Maintenance Battery MaintenanceOil LubricationLubricate Rear Axle Shafts Service Interval YearlyCheck Mower Blade Timing Servicing the Mower Blades4x4 Wood Block SET Mower Belt Tension Safety Interlock System CheckPTO Clutch Adjustment Check Engine MaintenanceTroubleshooting, Adjustments, & Service Troubleshooting the Mower Seat Slide Adjustment Seat AdjustmentHopper Latch Adjustment Pitch AdjustmentNuts Steering Gear AdjustmentBrake Adjustment Adjustment NutBattery Charging Troubleshooting, Adjustment, & ServiceCATCHER-FULL Alarm Adjustment Mower Lift AdjustmentAdjust PTO Clutch Window Adjustment Nut Feeler Gauge PTO Clutch AdjustmentTransmission Release Lever Transmission PurgingCutting Height Adjustment Mower AdjustmentsLeveling The Mower Arbor Drive Belt Replacement PTO Belt ReplacementChassis DimensionsEngine TransmissionTechnical Manuals Replacement PartsMaintenance Items Optional AccessoriesPage O D U C T S

XL Series specifications

The Snapper XL Series is a cutting-edge line of outdoor power equipment designed for efficiency, durability, and ease of use. Aimed at both residential and commercial users, the Snapper XL Series stands out in its category for its advanced technologies and impressive features.

One of the standout features of the Snapper XL Series is its powerful engine options. Equipped with robust, high-performance engines, these machines offer excellent torque and acceleration, making them capable of handling tough mowing conditions. Users can choose between gas and battery-powered models, catering to various preferences and requirements for energy efficiency and sustainability.

The Snapper XL Series is designed with user comfort in mind. The ergonomic controls ensure that operators can easily navigate the equipment, reducing fatigue during extended use. Enhanced seat design with adjustable settings is also a highlight, ensuring that users of all sizes can find a comfortable and supportive position while mowing.

Another key characteristic of the Snapper XL Series is its innovative cutting technology. The series employs a unique cutting deck design that enhances airflow, providing a superior cut quality while promoting even grass distribution. This results in a professional finish, reducing the need for multiple passes over the same area.

Durability is a hallmark of the Snapper XL Series. Crafted from high-quality materials, these machines are built to withstand the rigors of outdoor use. The reinforced frames and heavy-duty components ensure longevity and dependability, making them a worthwhile investment for home and business owners alike.

The Snapper XL Series also includes a range of advanced safety features. These include automatic shut-off systems and operator presence controls, which help to prevent accidents and enhance user security.

In addition, the ease of maintenance is a major consideration in the design of the Snapper XL Series. With accessible engine components and user-friendly maintenance schedules, users can perform routine checks and servicing without hassle.

Moreover, technology integration allows for enhanced user experience, with some models featuring LED lights for better visibility during early morning or late evening tasks.

In conclusion, the Snapper XL Series combines power, comfort, and superior technology, making it an ideal choice for anyone looking for reliable outdoor equipment. Whether for residential lawns or large commercial properties, the Snapper XL Series proves to be a versatile solution to meet various gardening and landscaping needs.
Top Page Image Contents