Snapper YZ145333BVE, YZ145383BVE important safety instructions Cutting Height Adjustment

Section 2 - OPERATING INSTRUCTIONS

2.3.5. CUTTING HEIGHT ADJUSTMENT

This machine has seven different cutting height positions. IMPORTANT: When positioning the cutting deck into a higher cutting position, pull up on the deck lift handle only, it is not necessary to pull up on the release lever at the same time. Use the release lever when moving deck cutting height to a lower cutting position.

1.Grasp both handles together to disengage latch.

2.Raise or lower handles to desired height.

3.Release lower handle to engage latch. See Figure 2.9.

DECK LIFT

HANDLE

HIGHEST

NOTCH

RELEASE

LEVER

CONNECTING BAR OMITTED

IN THIS VIEW FOR CLARITYDETENT

PLATE

FIGURE 2.9

9