Do not Overfill | Snapper Z-rider instruction

SET-UP INSTRUCTIONS & PRE-OPERATION CHECKLIST SNAPPER ZERO TURNING Z-RIDER with MID MOUNT MOWER

INTRODUCTION: These instructions cover the set-up of the Snapper Mid Mount Z-Rider Mower. Complete each of the following steps carefully. Review and complete each item as instructed on the Pre-Operation checklist. The Snapper Product Registration card must be filled out and sent to Customer Service department at Snapper when completed.

IMPORTANT: The battery for this unit is shipped dry. A package of battery acid (electrolyte) will have to be purchased separately. Allow sufficient time for charging and installing the battery before operating the rider. Pay close attention to the precautionary statements on the battery and in these instructions. You will also need an automotive type battery charger to activate the battery for use.

STEP 1: Remove machine from the container. The battery will have to be charged and installed.

STEP 2: Remove battery from the battery compartment before charging.

STEP 3: Place battery in a well ventilated area on a level non-concrete surface.

WARNING

The electrolyte (acid) produces a highly explosive gas. Keep all sparks, flame and fire away from area when charging battery or when handling electrolyte or battery. Electrolyte (acid) is a highly corrosive liquid. Wear eye protection. Wash affected areas immediately after having eye or skin contact with electrolyte (acid). Battery acid is corrosive. Rinse empty acid containers with water and mutilate before discarding. If acid is spilled on battery, bench, or clothing, etc., Flush with clear water and neutralize with baking soda.

STEP 4: Remove battery cell caps. Fill cells as required with electrolyte (purchased separately) to proper level. Filling battery with electrolyte will bring the battery to 80% charged state.

WARNING

DO NOT OVERFILL!

STEP 5: With cell caps removed, connect battery charger to battery terminals; RED to positive (+) and BLACK to negative (-) terminal.

STEP 6: Slow charge the battery at 2 amp for 2 hours to bring the battery to full charge.

STEP 7: After charging, check level of electrolyte and add as needed to bring fluid to proper level.

STEP 8: Reinstall cell caps.

STEP 9: Install battery into power unit.

STEP 10: Both bolts are already installed on both terminals. Connect positive (+) cable (red) first, from wiring harness to the positive terminal (+) on battery and secure with nut provided in hardware bag. Connect negative (-) cable (black) last, to negative terminal (-) on battery and secure with nut also provided. Apply a small amount of grease over terminals to prevent corrosion. See Figure 1.

WARNING

Shield the positive terminal with terminal cover located on battery harness. This prevents metal from touching the positive terminal, which could cause sparks.

RED (POSITIVE) CABLE

BLACK (NEGATIVE) CABLE

TERMINAL COVER MUST

SHIELD POSITIVE

TERMINAL AFTER

INSTALLATION

FIGURE 1

STEP 11: Take the necessary precautions, when handling fuel. Fill the fuel tank with clean fuel. Check oil and add oil if needed as stated in Engine Owners Manual. Move fuel tank selector valve handle to the desired fuel tank.

INSTRUCTION No. 7-5597 (I.R. 4/1/03)

Z-rider specifications

The Snapper Z-Rider is an innovative zero-turn mower designed to provide exceptional performance and ease of use for homeowners and professional landscapers alike. Renowned for its robust construction and cutting-edge features, the Z-Rider stands out in the competitive lawn care market.

One of the main features of the Snapper Z-Rider is its powerful engine options. Equipped with reliable Briggs & Stratton or Kawasaki engines, the mower provides excellent power and efficiency. The engine options are designed to tackle even the most demanding mowing tasks, allowing users to maintain their lawns effortlessly and effectively.

The Z-Rider's zero-turn capability is another highlight, offering unparalleled maneuverability. With its dual hydrostatic transmission system, operators can effortlessly turn in place, navigate around obstacles, and achieve a precise cut. This feature greatly reduces the mowing time, making it ideal for those with large lawns or commercial properties.

The mower also incorporates a durable, heavy-duty steel frame that ensures stability and longevity. The custom-cut deck is available in different sizes, typically ranging from 42 to 72 inches, allowing users to choose the perfect size for their lawn care needs. The cutting deck features a mulching system that finely chops grass clippings, returning valuable nutrients back to the lawn.

Comfort is a priority with the Snapper Z-Rider. It features an ergonomically designed high-back seat with ample cushioning, allowing for hours of mowing without discomfort. The easy-to-use controls are intuitively positioned, making it simple for users to operate the mower effectively.

Additionally, the Snapper Z-Rider comes equipped with innovative technologies like the Smart Lawn app, which enhances user experience by providing maintenance reminders and tips for optimal performance. This connectivity allows users to keep track of their mower’s status and schedule care when needed, adding to the overall convenience.

Safety features are also prioritized in the Z-Rider, with a dedicated safety switch that automatically shuts off the engine when the operator leaves the seat. This ensures peace of mind during operation, particularly in busy environments.

In conclusion, the Snapper Z-Rider is a top choice for those seeking a powerful, efficient, and user-friendly zero-turn mower. Its combination of robust construction, advanced technology, comfort, and safety features make it a reliable tool for achieving beautifully maintained lawns. Whether for residential or commercial use, the Snapper Z-Rider delivers exceptional performance every time.