Snapper ZM2200K, ZM2200KU, ZM2500K, ZM2500KH, MZM2200KH, ZM5200M, ZM6100M Stopping Machine

Page 9

Section 2 - OPERATING INSTRUCTIONS

2.3 CUTTING HEIGHT ADJUSTMENT

1.Adjust cutting height as desired to any position, using deck lift lever. See Figure 2.8.

NOTE: The engine does not have to be running to adjust cutting height.

DECK LIFT LEVER SHOWN

IN HIGH CUTTING HEIGHT

POSITION

WARNING

DO NOT make turns at high speed. Slow machine motion. Move motion control lever gently and with caution. DO NOT make sudden changes in speed or direction.

2.4.2. STOPPING MACHINE

1.Return motion control lever (joystick) to neutral. IMPORTANT: Operator must use hand assistance to bring motion control lever to the neutral position.

2.Engage parking brake.

3.Push blade switch in to “OFF” blades disengaged position.

4.Stop engine. Move engine speed control to turtle “SLOW” position. Turn key to stop position.

5.Remove key.

FIGURE 2.8

2.4 OPERATION- MOTION CONTROLS 2.4.1. DRIVING MACHINE

1.Start engine. Release parking brake.

2.Move motion control (joystick) gently and with caution in desired direction:

FORWARD- Move control forward. REVERSE- Move control to the rear. LEFT TURN- Move control towards left. RIGHT TURN- Move control towards right. ZERO RADIUS TURN- Move control diagonally from neutral in desired direction. See Figure 2.9.

WARNING

DO NOT park the machine on slopes. DO NOT leave machine with engine running. Stop engine. Stop blades. Engage parking brake. Remove key.

REARWARD

MOVEMENT

RIGHT

LEFT TURN

TURNFORWARD MOVEMENT

FIGURE 2.9

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Mower Unit Model Number ExplanationProtection for Children Protection Against TipoversPreparation Maintenance OperationMount and dismount machine from left side Table of Contents Nomenclature IntroductionPRE-START Check List Operating InstructionsStarting Engine Starting & Stopping ENGINE, BLADES, Parking BrakeStopping Engine Starting Mower BladesParking Brake Cutting Height Adjustment Stopping MachineOPERATION- Motion Controls 2.4.1. Driving Machine Change Engine OIL Service After First 5 Hours Check Mower BladeAfter Every 25 Operating Hours Check Mower Drive BeltAnnually END of Each Season Before Operating MachineDeck Removal Deck Removal from previous Power Transfer Shaft RemovalSide to Side Level Neutral Position AdjustmentsFront to Rear Level Mower Deck Adjustment LevelnessParking Brake Adjustment Engine Adjustments & RepairMower Blade Replacement Blade Wear Limits Belt Replacement Mower Drive Belt ReplacementBlade Sharpening Belt RemovalBattery Battery Removal Battery InstallationBattery Service Battery Testing NEW Battery PreparationDo not Overfill Trouble Shooting on Next Problem Probable Cause Corrective ActionTractor Will Not Move Service Performed Each MAINTENANCE/REPLACEMENT Parts Mower DeckMAINTENANCE/REPLACEMENT Parts 100Disclaimer of Warranty Year Limited WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Page Page Page Manual No -6481 REV , 8/20/99 MID Mount Z-RIDER Zero Turning Hydro Drive Series

ZM2200K, ZM2200KU, ZM2500K, ZM2500KH, MZM2200KH, ZM5200M, ZM6100M, ZM2500K, ZM2200K, ZM2200KU, ZM2500KH, MZM2200KH ZM522M, ZM6100M specifications

The Snapper ZM series is a highly regarded line of zero-turn mowers, renowned for their robust design, cutting-edge technology, and exceptional performance. Among the models in this series are the ZM2500K, ZM2200K, ZM2200KU, ZM2500KH, MZM2200KH, ZM522M, ZM6100M, ZM5200M, and additional variations, each offering distinct features tailored to meet a range of lawn care needs.

The ZM2500K is a standout model, equipped with a powerful engine that ensures reliable operation while maintaining a swift mowing speed. Its innovative cutting deck design provides a clean and precise cut, making it suitable for large lawns. Similar features can be found in the ZM2500KH, which also boasts enhanced ergonomics and comfort features, allowing users to operate for extended periods without fatigue.

The ZM2200K and ZM2200KU models, on the other hand, offer a more compact design without compromising on power. They are ideal for smaller properties where maneuverability is essential. Both models are equipped with high-performance engines and a tilt steering mechanism for finer control. The ZM2200KU includes added features such as enhanced suspension for a smoother mowing experience over uneven terrain.

While the MZM2200KH and ZM522M focus on providing exceptional cutting performance, the MZM2200KH stands out with its high discharge system, designed to efficiently handle grass clippings, ensuring a tidy finish every time. Meanwhile, the ZM522M offers a unique balance of power and efficiency, making it an excellent choice for both residential and commercial use.

The ZM6100M is tailored for users who require intense landscaping services, providing superior durability and a wide cutting path. This model comes with advanced technologies such as an automatically adjusting cutting height and a user-friendly dashboard for better control during operation.

Lastly, the ZM5200M serves as an excellent mid-range option, featuring a robust engine and a versatile cutting deck that makes it perfect for various lawn conditions. Each model in the Snapper ZM series reflects the brand's commitment to high-quality engineering and user-friendly features, designed to deliver an exceptional mowing experience while ensuring reliability and longevity. Whether for residential or commercial use, these mowers exemplify efficiency, power, and innovation, making lawn care a more enjoyable task.
Top Page Image Contents