Snapper SB2000M Seasonal Storage, Fuel System, Troubleshooting Table Engine, Other

Page 9

For Parts Call K&T 606-678-9623 or 606-561-4983

SEASONAL STORAGE

Prepare unit for storage at end of season or if it will not be used for 30 days or more.

If your unit is to be stored for a period of time:

SClean the entire unit before lengthy stor- age.

SStore in a clean dry area.

SLightly oil external metal surfaces.

FUEL SYSTEM

Under FUELING ENGINE in the OPERA- TION section of this manual, see message la- beled IMPORTANT regarding the use of ga- sohol in your engine.

Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or fuel storage container. Follow the mix instructions found on stabilizer container. Run engine at least 5 minutes after adding stabilizer.

TROUBLESHOOTING TABLE

ENGINE

SRemove spark plug and pour 1 teaspoon of 40:1, 2-cycle engine oil (air cooled) through

the spark plug opening. Slowly pull the starter rope 8 to 10 times to distribute oil.

SReplace spark plug with new one of recom-

mended type and heat range.

SClean air filter.

S Check entire unit for loose screws, nuts, and bolts. Replace any damaged, broken, or worn parts.

SAt the beginning of the next season, use only fresh fuel having the proper gasoline to oil ratio.

OTHER

SDo not store gasoline from one season to another.

SReplace your gasoline can if it starts to rust.

WARNING: Always stop unit and disconnect spark plug before performing any of the recommended remedies below other than remedies that require operation of the unit.

TROUBLE

 

CAUSE

REMEDY

Engine will not

1.

Engine flooded.

1. See “Starting a Flooded Engine”

start.

 

 

in Operation section.

 

2.

Fuel tank empty.

2. Fill tank with correct fuel mixture.

 

3.

Spark plug not firing.

3. Install new spark plug.

 

4.

Fuel not reaching

4. Check for dirty fuel filter; replace.

 

 

carburetor.

Check for kinked or split fuel line;

 

 

 

repair or replace.

 

5.

Compression low.

5. Contact an authorized service dealer.

Engine will not

1.

Fuel not reaching

1. Check for dirty fuel filter; replace.

idle properly.

 

carburetor.

Check for kinked or split fuel line;

 

 

repair or replace.

 

2.

Carburetor requires

 

2. Contact an authorized service dealer.

 

 

adjustment.

 

 

3.

Crankshaft seals worn.

3. Contact an authorized service dealer

 

4.

Compression low.

4. Contact an authorized service dealer.

Engine will not

1. Air filter dirty.

1. Clean or replace air filter.

accelerate,

2. Fuel not reaching

2. Check for dirty fuel filter; replace.

lacks power, or

 

carburetor.

Check for kinked or split fuel line;

dies under a

 

 

repair or replace.

3. Spark plug fouled.

3. Clean or replace spark plug

load.

 

 

and re-gap.

 

 

 

 

4. Carburetor requires

4. Contact an authorized service dealer.

 

 

adjustment.

5. Contact an authorized service dealer.

 

5. Carbon build up.

 

6. Compression low.

6. Contact an authorized service dealer.

Engine smokes

1. Choke partially on.

1. Adjust choke.

excessively.

2. Fuel mixture incorrect.

2. Empty fuel tank and refill with

 

3. Air filter dirty.

correct fuel mixture.

 

3. Clean or replace air filter.

 

4. Carburetor requires

4. Contact an authorized service dealer.

 

 

adjustment.

 

Engine runs hot.

1. Fuel mixture incorrect.

1. See “Fueling Engine” in Operation

 

 

 

section.

 

2. Spark plug incorrect.

2. Replace with correct spark plug.

 

3. Carburetor requires

3. Contact an authorized service dealer.

 

 

adjustment.

4. Contact an authorized service dealer.

 

4. Carbon build up.

-- 9 --

www.mymowerparts.com

Image 9
Contents Manual de Instrucciones Manuel d’Instructions Plan Ahead Know Your UnitHandle Fuel with CAUTION, IT is Highly Flammable Operate Your Unit SafelyVacuum BAG Assembly Blower Tube AssemblyMaintain Your Unit Properly HOW to Convert Unit from Vacuum USE to Blower USE Vacuum Tube AssemblyElbow Tube Small VacuumKnow Your Blower Shoulder Strap AdjustmentThrottle Lever Primer ButtonOperating Tips Operating PositionBefore Starting Engine Fueling Engine To Stop the EngineStarting a Warm Engine Starting a Cold EngineStarting a Flooded Engine General RecommendationsClean AIR Filter Inspect and Clean Unit and DecalsCarburetor Adjustments Replace Fuel FilterSeasonal Storage Troubleshooting Table EngineFuel System OtherLigations The U. S. Environmental Electrolux Home PRODUCTS, INCIntermediate 125 hours Extended 300 hours

SB2000M specifications

The Snapper SB2000M is a powerful and versatile lawn mower designed to make lawn care easier and more efficient for homeowners and landscaping professionals alike. With its robust features and innovative technologies, the SB2000M stands out in the competitive outdoor power equipment market.

One of the most notable features of the Snapper SB2000M is its reliable 190cc engine. This engine provides ample power to tackle even thick grass with ease. Its easy-to-start system ensures that users can quickly get to work without the hassle of complicated starting procedures. The durable steel cutting deck is designed for longevity, providing a perfect combination of strength and weight, enabling the mower to manage various terrains effectively.

The SB2000M comes equipped with a 21-inch cutting deck, which offers users the ability to cover large areas while still being maneuverable enough to navigate around obstacles such as flower beds and trees. The adjustable cutting height feature allows users to customize their lawn care experience with six different height settings, ranging from one to four inches. This feature ensures that homeowners can achieve their desired lawn appearance, whether they prefer a closely manicured look or a more natural finish.

In terms of technology, the Snapper SB2000M boasts an advanced rear-wheel drive system, which enhances its maneuverability. This drive system provides better traction while mowing on slopes and uneven ground, making it an ideal choice for varied landscapes. The self-propelling capability allows for less strain and effort, allowing users to mow larger areas with minimal fatigue.

Moreover, the Snapper SB2000M supports both mulching and bagging options, offering flexibility depending on user preferences and lawn care needs. The mulch plug enables grass clippings to be finely chopped and returned to the lawn, providing natural fertilization, while the rear bag can efficiently collect clippings for disposal or composting.

Safety features are also a priority with the SB2000M. The engine automatically shuts off when the operator releases the handle, minimizing risks associated with accidental operation. Additionally, the folding handlebar makes storage easier, reducing the amount of space needed when the mower is not in use.

In summary, the Snapper SB2000M is a feature-rich mower that combines power, agility, and user-friendly technology, making it an ideal choice for anyone looking to maintain their lawn effectively. With its durable construction, adjustable cutting heights, and dual grass management options, it established itself as a top-tier option for achieving a healthy and attractive lawn.