Unit operation, Before Starting Engine

4unit operation

STARTING THE ENGINE

IMPORTANT NOTE: The procedures outlined within this section are general guidelines, and are in no way meant to replace or supercede engine manufacturer’s operating instructions. In order to obtain optimum performance from your engine, refer to your engine manual.

WARNING! IMPELLER IS MOUNTED DIRECTLY TO ENGINE SHAFT – STARTING ENGINE WILL

!RESULT IN IMMEDIATE HIGH-VELOCITY DISCHARGE. TO AVOID INJURY OR DAMAGE, BE SURE DISCHARGE IS POINTED AWAY FROM PEOPLE, PETS AND PROPERTY WHEN START- ING.

BEFORE STARTING ENGINE:

•Be sure that the unit is completely assembled, all fasteners are tightened securely, and all safety guards and compo- nents are in place.

•Be sure to check engine’s oil and fuel levels* and add as needed. (See engine manual for recommended oil and

gasoline specifications.) Never check the engine while it is running or while you are smoking. Check only when engine is cold.

All machines are shipped without oil or fuel unless otherwise noted.

•Be sure that fuel valve is set to open position.

OPEN

TO START ENGINE:

CLOSED

•Move choke control located on engine to the closed “ON” position.

CHOKED

•Move engine speed control, located on the handle, to the fast “Rabbit” position.

ENGINE

SPEED

CONTROL