6-1352 ACCESSORY, 42” SNOW BLADE (for 1-Piece Frame Hydro Drive Tractors)
--6-1352 KIT, Snow Blade (Includes items 1 thru 33)
24-1617 WELDMENT, Bracket, 36/42 Snow Blade
33-4230 EXTENSION, Lift, 36/42 Snow Blade
--5-3388 ASSEMBLY, 42” Dozer Blade (Includes indented items below)
4 | 4-1616 | WELDMENT, 42” Blade |
5 | 3-8145 | SCRAPER |
6 | 4-0445 | WELDMENT, Slide (2) |
7 | 9-0546 | NUT, 3/8-15 Hex Center Lock, Grade 5 or B (9) |
8 | 9-0747 | BOLT, 3/8-16 x 1” Square Neck Carriage, Grade 2 (4) |
9 | 9-0850 | BOLT, 3/8-16 x 3/4” Short Neck Carriage, Grade 2 (5) |
--6-1354 BOX, Accessory (Includes indented items below)
10 | 2-1153 | PIN, Holding |
11 | 3-2725 | BRACKET, Mount (2) |
12 | 3-4105 | DETENT, High Lockout |
13 | 4-1640 | WELDMENT, Frame Reinforcement |
14 | 3-4839 | BRACE, Latch (Snow) |
15 | 9-1255 | U-BOLT, 5/16-18 |
-- | 6-1356 | BAG, Hardware (Includes items 16 thru 33) |
16 | 3-1002 | PIN |
171-1714 HAIR PIN, 3/32 x 1-1/8” (4)
183-2763 TAB, Lift Lever (2)
199-0005 BOLT, 1/4-20 x 1/2” Short Neck Carriage, Grade 5 (2)
209-0017 SCREW, 1/2-20 x 2-3/4” Hex Head Cap, Grade 5
219-0053 WASHER, 1/4” Internal Tooth Lock (2)
229-0063 NUT, 1/4-20 Hex (2)
231-1768 PIN, 1/2” x 2” Clevis (3)
249-0130 NUT, 3/8-16 Hex (8)
259-0563 SCREW, 3/8-16 x 1” Hex Head Cap, Grade 5 (8)
269-0250 WASHER, 1/2” SAE Flat (3)
279-0390 WASHER, 3/8” Internal Tooth Lock (6)
282-3682 REFLECTOR, Red (2) (not shown)
299-0803 BOLT, 1/4-20 x 5/8” (2)
309-0583 NUT, 1/4-20 Hex Flange Lock (2)
311-1773 HAIR PIN, 3/32” (3)
329-0266 NUT, 1/2-20 Hex Center Lock
339-1067 NUT, 5/16-18 Hex Center Lock, Grade B (2)
LT (Small Frame) ACCESSORIES | MANUAL No. 06613 |