Snapper 1721301-02, 1693755 manual Adjustments, Skid Shoe Adjustment, Spring Tension

Page 8

Adjustments

Skid Shoe Adjustment

Slotted holes are provided to permit adjustment of the shoe assemblies for raising and lowering the blade to various working heights (see Figure 3).

When cleaning snow from gravel or earth drives or walks, the shoe assemblies should be lowered fully to prevent blade contact with gravel or ground. When cleaning smooth hard surfaces like concrete, the shoe assemblies are normally placed fully up to allow the blade to scrape the surface.

To adjust the skid, raise the blade off the ground and block with a piece of wood. Loosen the bolts (B, Figure

3)and move the skid shoes (A) up or down to desired height. Tighten the bolts securely.

Figure 3.

A. Skid Shoes

B. Bolts

Spring Tension

See Figure 4. This snow plow/dozer blade is spring loaded so that when the blade strikes a solid object, the springs will allow the blade to release as shown, rather than cause damage. The blade will go back to its original position after object is cleared.

Figure 4. Dozer Blade “Released”

See Figure 5. To adjust spring tension hold rear nut (B) and loosen front nut (E). Tighten rear nut (B) to increase spring tension, or loosen to decrease tension.

For initial adjustment, tighten nut (B) on each eyebolt enough to expose about 3/4" (19mm) of thread. Tighten front nut (E) against rear nut (B) to lock adjustment in place.

Figure 5. Tension Springs

 

A. Eyebolt

D. Pivot Frame

B. Nut, 5/16

E. Nut, 5/16

C. Spring

 

7

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Snow Plow/Dozer Blade HitchTable of Contents Safety Rules Information General WarningsBlade Angle Control Lever Attachment LiftGeneral Operating Instructions Checks Before StartingEngine & Ground Speed Selection TransportingChanging Angle of the Blade Dozing TipsSnow Plowing Tips Daily StorageLubricate Dozer Blade MaintenanceSchedule For Normal Care Spring Tension AdjustmentsSkid Shoe Adjustment Adjustments Lift Rod AdjustmentInitial Setup Assembly Qty DescriptionComponents Assemble & Install Hitch Assemble BladeInitial Setup & Assembly Install Push Bar Push Bar Clevis Pin Hitch Safety Clip Not shownInstall Lift Rod Lift Rod Assembly Set Collars Spring Rod GuideInstall Angling Control Rod Removing Attaching the Hitch & Blade Removing & Attaching Dozer BladeRemoving & Attaching Removing & Attaching HitchHardware Identification & Torque Specifications Simplicity Mfg. Inc

1693755, 1721301-02 specifications

Snapper 1693755 and 1721301-02 are two notable products that stand out in the realm of advanced technology solutions tailored for a variety of applications. Both products have gained recognition for their robust features, user-friendly design, and the ability to enhance operational efficiency in diverse settings.

Snapper 1693755 is primarily designed for high-performance tasks such as real-time data processing and analytics. Its architecture supports an array of processing power, enabling quick execution of complex algorithms and data management tasks. One of the key features of Snapper 1693755 is its compatibility with various operating systems, which ensures seamless integration into existing workflows. Additionally, it supports multiple programming languages, providing flexibility for developers to choose their preferred tools for application development. The device is also equipped with advanced security features, such as encryption protocols and secure access controls, enhancing data protection.

The Snapper 1721301-02, on the other hand, focuses on connectivity and communication. This model is equipped with cutting-edge network technologies, ensuring reliable and fast data transfer. It supports multiple connectivity options, including Ethernet, Wi-Fi, and Bluetooth, making it a versatile choice for various environments. The user interface of Snapper 1721301-02 is designed to be intuitive, allowing users to navigate and manage settings with ease. Furthermore, it includes features such as real-time monitoring and diagnostic tools, which provide valuable insights into system performance and operational efficiency.

Both versions emphasize energy efficiency, utilizing power-saving technologies that reduce operational costs while maintaining high performance. They are built with durability in mind, constructed using high-quality materials that enable them to withstand challenging conditions and provide longevity.

In conclusion, Snapper 1693755 and 1721301-02 are exemplary technological solutions that cater to different needs within the marketplace. Their impressive main features, advanced technologies, and robust characteristics set them apart as reliable tools for organizations seeking to improve performance and streamline operations. Users considering these models can expect a blend of efficiency, connectivity, and security, making them an attractive investment for the future.
Top Page Image Contents