Snapper 1693755, 1721301-02 manual Initial Setup & Assembly

Page 13

Initial Setup & Assembly

2.Increase front tire pressure to 20 psi (138 kPa) to compensate for added weight of the hitch, plus bar and blade. Be sure both tires have equal pressure.

3.From the front of tractor, slide the hitch under the tractor so that the hitch bar is positioned at the front of the unit.

4.See Figure 13. Turn the wheels fully left and lift the front hitch bar (A) up onto the tractor brackets (D). Make sure it is fully seated into the tractor brackets. Install the long hitch pin (B) through the bracket (bot- tom rear holes) and up-stop brackets (E). Secure it with the safety clip (C).

NOTE: If your tractor is not equipped with the Large Lift Lever, install it at this time. Follow the instructions sup- plied with the kit.

Note that the rear bracket (A, Figure 14) is mounted using the lift lever rod (B). After installation, the lift lever rod assy. can be removed by pivoting the lift lever fully forward until it is parallel to the ground, and sliding it out of the quadrant

5.See Figure 14. Slide the rear bracket (A), and wash- ers (D), onto the lift lever shaft, and secure with the hairpin clips (C).

6.See Figure 14. Position the rear plate of the hitch assembly between the hanger tabs on the rear brack- et, and secure at the top mounting hole using the cle- vis pin (F), and hairpin clip (K).

7.See Figure 14. Install the capscrew (G), spacers (H & I), and whizlock nut (J) in the lower mounting hole as shown, and tighten securely.

8.The hitch assembly is now assembled to the unit, and you may proceed to installation of the push bar and blade.

 

A

C

 

 

E

D

B

Figure 13. Installing Hitch to Front of Tractor

A. Hitch Bar

D. Tractor Brackets

B. Hitch Pin

E. Up-Stop Brackets

C. Safety Clip

 

 

 

 

 

K

 

 

 

C

 

J

 

 

 

B

 

 

D

 

A

 

 

 

 

 

 

 

 

F

I

H

 

G

E

 

 

 

 

 

Figure 14. Installing Hitch to Rear Bracket

A.

Rear Bracket

G.

Capscrew, 3/8-16 x 2

B.

Lift Lever Rod

H.

Spacer, 25/64 x 5/8 x 17/64

C.

Hairpin Clip

I.

Spacer, 13/32 x 1 x 13/16

D.

Washer

J.

Nut, Whizlock, 3/8-16

E.

Hitch

K.

Hairpin Clip

F.

Clevis Pin

 

 

12

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Hitch Snow Plow/Dozer BladeTable of Contents General Warnings Safety Rules InformationAttachment Lift Blade Angle Control LeverChecks Before Starting General Operating InstructionsEngine & Ground Speed Selection TransportingDozing Tips Changing Angle of the BladeSnow Plowing Tips Daily StorageSchedule For Normal Care MaintenanceLubricate Dozer Blade Skid Shoe Adjustment AdjustmentsSpring Tension Lift Rod Adjustment AdjustmentsQty Description Initial Setup AssemblyComponents Assemble Blade Assemble & Install HitchInitial Setup & Assembly Push Bar Clevis Pin Hitch Safety Clip Not shown Install Push BarLift Rod Assembly Set Collars Spring Rod Guide Install Lift RodInstall Angling Control Rod Removing & Attaching Dozer Blade Removing Attaching the Hitch & BladeRemoving & Attaching Hitch Removing & AttachingHardware Identification & Torque Specifications Simplicity Mfg. Inc

1693755, 1721301-02 specifications

Snapper 1693755 and 1721301-02 are two notable products that stand out in the realm of advanced technology solutions tailored for a variety of applications. Both products have gained recognition for their robust features, user-friendly design, and the ability to enhance operational efficiency in diverse settings.

Snapper 1693755 is primarily designed for high-performance tasks such as real-time data processing and analytics. Its architecture supports an array of processing power, enabling quick execution of complex algorithms and data management tasks. One of the key features of Snapper 1693755 is its compatibility with various operating systems, which ensures seamless integration into existing workflows. Additionally, it supports multiple programming languages, providing flexibility for developers to choose their preferred tools for application development. The device is also equipped with advanced security features, such as encryption protocols and secure access controls, enhancing data protection.

The Snapper 1721301-02, on the other hand, focuses on connectivity and communication. This model is equipped with cutting-edge network technologies, ensuring reliable and fast data transfer. It supports multiple connectivity options, including Ethernet, Wi-Fi, and Bluetooth, making it a versatile choice for various environments. The user interface of Snapper 1721301-02 is designed to be intuitive, allowing users to navigate and manage settings with ease. Furthermore, it includes features such as real-time monitoring and diagnostic tools, which provide valuable insights into system performance and operational efficiency.

Both versions emphasize energy efficiency, utilizing power-saving technologies that reduce operational costs while maintaining high performance. They are built with durability in mind, constructed using high-quality materials that enable them to withstand challenging conditions and provide longevity.

In conclusion, Snapper 1693755 and 1721301-02 are exemplary technological solutions that cater to different needs within the marketplace. Their impressive main features, advanced technologies, and robust characteristics set them apart as reliable tools for organizations seeking to improve performance and streamline operations. Users considering these models can expect a blend of efficiency, connectivity, and security, making them an attractive investment for the future.
Top Page Image Contents