Snapper SV25650B, ESV25650B, SV25550HV Familiarization, Introduction, Nomenclature

Page 6

Section 1 – FAMILIARIZATION

ENGINE SPEED CONTROL

HEIGHT CONTROL

CHOKE

FAST

ENGINE SPEED

CONTROL

DEBRIS BAG

VENT, WITH

ZIPPERS

SLOW

STOP

BRIGGSHONDA

(PRIMER)(CHOKE)

DISCHARGE

DOOR

VACUUM

NOZZLE

FIGURE 1.1

ENGINE

PRIMER

ACCESSORY PLUG

1.1 INTRODUCTION

This manual has been prepared for the operator’s of the Yard Vacuum. Its purpose, aside from recommending standard operating procedures and routine service requirements, is to promote SAFETY through the use of accepted operating practices. Read, Understand and Follow the IMPORTANT SAFETY INSTRUCTIONS on Pages 2 & 3 of this manual and All SAFETY messages on the machine and its attachments before operating.

2.2.2NOMENCLATURE

The nomenclature picture above, Figure 1.1, shows the essential parts of the Yard Vacuum. It is recommended that all operators of this equipment become thoroughly familiar with the controls, components, and operation of this machine before operating. Specific details involving the engine are found in the separate engine owner’s manual. Study these manuals before operating and keep both handy for future reference.

6

Image 6
Contents Push Yard Vacuum Series Important Safety Instructions Protection for ChildrenOperation Table of Contents Setup Instructions Familiarization IntroductionNomenclature Safety and Instruction Labels Operating Instructions PRE-START Check ListStopping Engine OperationMaintenance Service Every 25 Hours Storage OUT of SeasonAdjustments & Repair Engine Adjustments & Repair Impeller ReplacementStop TroubleshootingProblem Probable Cause Corrective ActionSubject Service Reference To be Performed PagesProduct Registration Form Page Push Yard Vacuum Series