Snapper 1667-0 owner manual Install Wheel KIT, Before Starting the Engine, Add Engine Oil and Fuel

Page 6

Snapper 3250 Watt Generator

INSTALL WHEEL KIT

7.Attach the vibration mount to the mounting leg with a capscrew and lock nut.

To install wheel kit you need the following tools:

•15/16" (22mm) box, open end, or socket wrench

•Two 13mm box, open end, or socket wrenches

Install Wheel Kit as follows: (Refer to Figure 1)

Figure 1 — Installing the Wheel Kit

Capscrew

 

 

Handle

 

Axle Stud

 

 

Grip

 

 

Nut

 

Wheel

 

 

Nut

 

Jam Nut

Mounting Leg

Use Existing

Washer

 

Fasteners to

 

Retaining Pin

Vibration Mount

Secure Leg

 

Capscrew

 

1.Place bottom of generator cradle on a flat surface.

2.Place axle stud through wheel retainer on cradle frame.

3.Use 15/16” wrench to secure the axle stud to frame with 5/8-18 jam nut.

4.Install the other axle stud in the same manner.

NOTE: Be sure to install wheel with raised hub inboard.

5.Tip unit and install the wheel. Place flat washer over axle stud.

6.Retain wheel on axle stud with retaining pin. Install other wheel on remaining axle shaft the same way.

8.Remove two front nuts from vibration mount on unit with 13mm wrench. Use these nuts to retain the mounting leg.

9.Center the lifting handle on generator end of cradle. Attach the handle using two 13mm wrenches with two capscrews and two hex nuts.

BEFORE STARTING THE ENGINE

Add Engine Oil and Fuel

• Place generator on a level surface.

CAUTION

Any attempt to crank or start the engine before it has been properly filled with the recommended oil will result in equipment failure.

•Refer to engine manual for oil and fuel fill information.

•Damage to equipment resulting from failure to follow this instruction will void warranty.

•Refer to engine owner’s manual and follow oil and fuel recommendations and instructions.

NOTE: Check oil often during engine break–in. Refer to engine owner’s manual for recommendations.

NOTE: The generator assembly rotates on a prelubricated and sealed ball bearing that requires no additional lubrication for the life of the bearing.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Contact your Local Snapper Service Center WattTable of Contents Safety RulesEquipment Description Generator produces powerful voltage When Adjusting or Making Repairs to Your Generator Know Your Generator Before Starting the Engine Install Wheel KITTo install wheel kit you need the following tools Add Engine Oil and FuelUsing the Generator Operating GeneratorVolt AC, 20 Amp Duplex Receptacle ReceptaclesStopping the Engine Volt AC, 30 Amp Locking ReceptacleCapacity Power ManagementDont Overload Generator ExampleEngine Maintenance SpecificationsGeneral Maintenance Recommendations Generator MaintenanceStorage Generator StorageEngine Storage Other Storage Tips Troubleshooting Snapper 3250 Watt Generator Schematic Wiring Diagram Exploded View Main Unit Parts List Main Unit DescriptionExploded View and Parts List Control Panel Exploded View and Parts List Wheel KIT Snapper Owner Warranty Policy Effective January 1 About your equipment warranty

1667-0 specifications

The Snapper 1667-0 is a versatile and compact lawn mower that is designed to provide both efficiency and precision for maintaining your outdoor spaces. Its robust construction and innovative technologies make it a popular choice among homeowners and landscaping professionals alike.

One of the defining features of the Snapper 1667-0 is its powerful engine. Equipped with a reliable Briggs & Stratton motor, this mower delivers consistent performance, enabling users to tackle a variety of grass types and conditions. With an easy-start mechanism, users can quickly get to work without the frustration of difficult ignition processes.

The mower's cutting deck spans 21 inches, providing a generous width that allows for faster mowing and less time spent on lawn maintenance. The deck is engineered for durability, constructed from high-quality materials to withstand the rigors of outdoor use. Additionally, its design incorporates an adjustable height feature, allowing users to choose from several cutting heights to achieve their desired lawn finish.

Another notable technology featured in the Snapper 1667-0 is the rear bagging system. This system not only collects grass clippings for a clean finish but also promotes healthier lawn growth by returning nutrients back to the soil when mulching is selected. The easy-to-access bagging system simplifies the process of disposing of clippings, ensuring that your lawn remains tidy with minimal effort.

The ergonomic design of the Snapper 1667-0 enhances user comfort. Its adjustable handle height aids in reducing strain during operation, making it suitable for users of various statures. The mower is also lightweight, allowing for easy maneuverability around obstacles and tight corners commonly found in residential lawns.

Furthermore, the Snapper 1667-0 features durable wheels that provide stability and traction on various terrains, ensuring a smooth mowing experience. Its compact size makes it easy to store in smaller spaces, catering to those with limited garage or shed room.

In summary, the Snapper 1667-0 combines power, durability, and user-friendly features in a compact design. Its efficient engine, versatile cutting options, ergonomic handle, and effective bagging system make it an excellent choice for maintaining vibrant lawns without excessive effort. Whether you are looking to spruce up your backyard or maintain commercial landscaping, the Snapper 1667-0 stands out as a reliable tool for achieving your lawn care goals.
Top Page Image Contents