Snapper 1667-0 owner manual Receptacles, Stopping the Engine, Volt AC, 20 Amp Duplex Receptacle

Page 8

Snapper 3250 Watt Generator

•

DO NOT connect 240 Volt loads to the 120 Volt duplex

Figure 3 — 120 Volt, 20 Amp Duplex Receptacle

 

receptacles.

 

 

•

DO NOT connect 3–phase loads to the generator.

 

•

DO NOT connect 50 Hz loads to the generator.

 

•

DO NOT OVERLOAD THE GENERATOR. See

 

 

“Don’t Overload Generator” on page 9.

 

Stopping the Engine

1.Unplug all electrical loads from generator panel receptacles. NEVER start or stop engine with electrical devices plugged in and turned ON.

2.Let engine run at no–load for 30 seconds to stabilize internal temperatures of engine and generator.

3.Turn engine off according to instructions given in engine owner’s manual.

4.Move fuel valve to “Off” position.

RECEPTACLES

CAUTION

Receptacles may be marked with rating value greater than generator output capacity.

•NEVER attempt to power a device requiring more amperage than generator or receptacle can supply.

•DO NOT overload the generator. See “Don’t Overload Generator”.

120 Volt AC, 20 Amp Duplex Receptacle

This receptacle (Figure 3) is protected against overload by a push-to-reset circuit breaker.

Use each receptacle to operate 120 Volt AC, single-phase, 60 Hz electrical loads requiring up to 2,400 watts (2.4 kW) at 20 Amps of current. Use cord sets that are rated for 125 Volts at 20 Amps (or greater).

120 Volt AC, 30 Amp Locking Receptacle

Use a NEMA L5-30 plug with this receptacle. Connect a

3-wire cord set rated for 125 Volts AC at 30 Amps to the plug (Figure 4).

Figure 4 — 120 Volt AC, 30 Amp, Locking Receptacle

3-Wire Cord Set

NEMA L5-30

Neutral

120V

Hot

Ground (Green)

Use this receptacle to operate 120 Volt AC, 60 Hz, single phase loads requiring up to 3,600 watts (3.6 kW) of power at 30 Amps. The outlet is protected by a push-to-reset circuit breaker.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Contact your Local Snapper Service Center WattEquipment Description Table of ContentsSafety Rules Generator produces powerful voltage When Adjusting or Making Repairs to Your Generator Know Your Generator Install Wheel KIT To install wheel kit you need the following toolsBefore Starting the Engine Add Engine Oil and FuelUsing the Generator Operating GeneratorReceptacles Stopping the EngineVolt AC, 20 Amp Duplex Receptacle Volt AC, 30 Amp Locking ReceptaclePower Management Dont Overload GeneratorCapacity ExampleSpecifications General Maintenance RecommendationsEngine Maintenance Generator MaintenanceEngine Storage Other Storage Tips StorageGenerator Storage Troubleshooting Snapper 3250 Watt Generator Schematic Wiring Diagram Exploded View Main Unit Parts List Main Unit DescriptionExploded View and Parts List Control Panel Exploded View and Parts List Wheel KIT Snapper Owner Warranty Policy Effective January 1 About your equipment warranty

1667-0 specifications

The Snapper 1667-0 is a versatile and compact lawn mower that is designed to provide both efficiency and precision for maintaining your outdoor spaces. Its robust construction and innovative technologies make it a popular choice among homeowners and landscaping professionals alike.

One of the defining features of the Snapper 1667-0 is its powerful engine. Equipped with a reliable Briggs & Stratton motor, this mower delivers consistent performance, enabling users to tackle a variety of grass types and conditions. With an easy-start mechanism, users can quickly get to work without the frustration of difficult ignition processes.

The mower's cutting deck spans 21 inches, providing a generous width that allows for faster mowing and less time spent on lawn maintenance. The deck is engineered for durability, constructed from high-quality materials to withstand the rigors of outdoor use. Additionally, its design incorporates an adjustable height feature, allowing users to choose from several cutting heights to achieve their desired lawn finish.

Another notable technology featured in the Snapper 1667-0 is the rear bagging system. This system not only collects grass clippings for a clean finish but also promotes healthier lawn growth by returning nutrients back to the soil when mulching is selected. The easy-to-access bagging system simplifies the process of disposing of clippings, ensuring that your lawn remains tidy with minimal effort.

The ergonomic design of the Snapper 1667-0 enhances user comfort. Its adjustable handle height aids in reducing strain during operation, making it suitable for users of various statures. The mower is also lightweight, allowing for easy maneuverability around obstacles and tight corners commonly found in residential lawns.

Furthermore, the Snapper 1667-0 features durable wheels that provide stability and traction on various terrains, ensuring a smooth mowing experience. Its compact size makes it easy to store in smaller spaces, catering to those with limited garage or shed room.

In summary, the Snapper 1667-0 combines power, durability, and user-friendly features in a compact design. Its efficient engine, versatile cutting options, ergonomic handle, and effective bagging system make it an excellent choice for maintaining vibrant lawns without excessive effort. Whether you are looking to spruce up your backyard or maintain commercial landscaping, the Snapper 1667-0 stands out as a reliable tool for achieving your lawn care goals.
Top Page Image Contents