La Crosse Technology WS-9035TWC instruction manual Maintenance and Care Instructions

Page 17

5)Place the remote temperature/humidity sensor and indoor weather station in position so the straight-line signal is not passing through more than two or three walls.

Problem: Temperatures do not match if units are placed next to each other.

Solution: Each temperature/humidity sensor is manufactured to be accurate to within 2 degree plus or minus and under normal conditions, so two sensors could be as much as 4 degrees different. However, the difference can be exaggerated further because the sensors are designed for different working environments. The indoor temperature sensor is less responsive to ambient air currents because of the shielding effect of the display's case. In addition, the case can act as a heat sink to absorb and store heat from external sources (i.e. handling of the case or radiant heat). Also, the much greater range of the remote temperature/humidity sensor requires a different calibration curve than the indoor range. Error is usually greater at the extreme ends of a range, making it harder to compare different ranges with different curves. Under non-laboratory conditions, it is difficult to compensate for the above factors and obtain an accurate comparison.

MAINTENANCE AND CARE INSTRUCTIONS

•Extreme temperatures, vibration, and shock should be avoided to prevent damage to the units.

•Clean displays and units with a soft, damp cloth. Do not use solvents or scouring agents; they may mark the displays and casings.

•Do not submerge in water.

•Immediately remove all low powered batteries to avoid leakage and damage.

•Opening the casings invalidates the warranty. Do not try to repair the unit. Contact La Crosse Technology for repairs.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents WS-9035TWC Table of Contents Inventory of Contents Remote TEMPERATURE/HUMIDITY Sensor Detailed SET-UP Guide Battery InstallationQuick SET-UP Guide Important Notes on Set-up and OperationII. Function Keys Program ModeProgramming Sequence and Default Settings IV. Time Zone Setting III. Setting the LCD ContrastDaylight Saving Time DST Setting VI. RADIO-CONTROLLED Time ON/OFF SettingVIII. Time Setting VII or 24 Hour Time SettingWwvb Remote Control Time Manual Time SettingSetting the Snooze IX. Setting the YEAR, DAY and MonthXII. Setting the Forecast Sensitivity XI. Selecting F or CForecast LCD Features of the WS-9035UWeather Forecast Weather IconsIV. Minimum and Maximum Temperature Records III. Outdoor Temperature and HumidityViewing the Indoor Temperature Records Viewing the Outdoor Temperature RecordsVI. Viewing the CURRENT, Maximum and Minumum DEW Point Resetting the Mimimum and Maximum RecordsMoon Phase VIII.BEAUFORT Scale Wind Speed Outdoor LCDVII. Wind SPEED, Wind CHILL, Minimum and Maximum Values Beaufort Number Or Force Wind Speed Description IX. Time Alarm Mounting with Screws Mounting Remote TEMPERATURE/HUMIDITY SensorMounting with Adhesive Tape Mounting with Nylon StrapsIII. the Indoor Weather Station TroubleshootingII. the Remote Wind Speed Sensor Maintenance and Care Instructions Power Supply SpecificationsDimensions H x W x D Weather data measuring rangeFCC Disclaimer Warranty Information
Top Page Image Contents