Huawei HG552a1 manual Accessing Mobile Storage Devices, Requirement, Enter

	Functions Introduction
Table 4-1Requirements on PC settings
Item	Requirement
Network protocol	Enable the TCP/IP.
IP address and subnet mask of the PC	Select Automatically obtain an IP address.
Internet Explorer	Do not use the proxy server.

To log in to the Web configuration page, do as follows: Step 1 Start the Internet Explorer on the PC.

Step 2 Enter http://192.168.1.1 in the address bar of the Internet Explorer, and then press

Enter.

The Login dialog box is displayed.

Step 3 Enter the name and password (telekom and telekom by default) in the Login dialog box, and then click OK.

4.2Accessing Mobile Storage Devices

The HG552a1 provides the home storage function. USB devices, such as USB disks, can be connected to the USB interface on the HG552a1. You can access mobile storage devices through the File Transfer Protocol (FTP) server.

To access a mobile storage device, do as follows:

Step 1 Connected the USB device to the USB interface on the HG552a1.

Figure 4-1Connect to the USB interface

Step 2 Enable the FTP Server and configure the FTP Server parameters.

10