Honeywell TE529ELW, TS33 user manual Snooze, Disabling Alarm, Alarms, Precautions, Specifications

Page 9
: -5°C to +50°C / 23°F to 122°F
: 0.1°C/ 0.2°F
: 25% RH to 90% RH

SNOOZE

When the alarm sounds, press the SNOOZE/LIGHT button to temporarily stop the alarm. After depressing SNOOZE/LIGHT button, the alarm sound will resume in

5 minutes. If the alarm is not disabled after that, it will sound for 4 more minutes and then will stop by itself.

DISABLING ALARM

Press [ALARM] button on the main unit to disable an alarm.

ALARMS

* Weekday Alarm

The alarm will sound and the alarm icon will flash at the set time Mondays through Fridays.

* Single Day Alarm

The alarm will sound and the alarm icon will flash at the set time, but will not activate on subsequent days.

* Low Temperature Pre-Alarm

If an outdoor temperature is 32º F / 0º C or below, the pre-alarm feature will be activated. The pre-alarm time interval can be set for 15, 30, 45, 60, 75 or 90 minutes before the weekday or single alarm time. Press and hold

[ALARM ON/OFF] button for two seconds in Pre-Alarm mode to set the pre-alarm interval.

W” (Weekday alarm), “ S ” (Single day alarm), and “Pre-AL” (Pre-alarm) icons will indicate which alarm mode is armed. You can enable or disable an alarm by pressing

the [ ], [ ] buttons in alarm display mode. Press ALARM ON/OFF to toggle between alarm modes or to return to the default display.

15

PRECAUTIONS

This product is engineered to give you years of satisfactory service if handled carefully. Here are a few precautions:

1.Do not immerse the units in water.

2.Do not clean the units with abrasive or corrosive materials. They may scratch the plastic parts and corrode the electronic circuits.

3.Do not subject the product to excessive force, shock, dust, temperature, or humidity, which may result in malfunctions, shorter lifespan, damaged batteries, and damaged parts.

4.Do not tamper with the units' internal components. Doing so will invalidate the warranty and may cause damage. These units contain no user-serviceable parts.

5.Use only fresh batteries. Do not mix new and old batteries.

6.Read the user's manual thoroughly before operating the units.

SPECIFICATIONS

Temperature and Humidity Measurement

Main unit

Indoor Temperature

Proposed operating range

Temperature resolution Indoor Humidity Proposed operating range Resolution: 1%

Comfort indicators – COMFORT, WET & DRY User- Selectable F° or C° temperature display format

16

Image 9
Contents TE529ELW Introduction Product Overview Main Unit FeaturesAlarm ON/OFF Button Mode ButtonMemory Button UP ButtonRemote Sensor Features Battery CompartmentLED Indicator ResetBattery Installation Remote Sensor F SwitchBattery Installation Main Unit LOW Battery WarningTemperature Trends Maximum and Minimum Temperature & HumidityComfort Level Indicators Reading the Kinetic Wave DisplayLost Communications Weather ForecastAlarm Setting Clock Manually Time ZoneTransmission Collision Atomic ClockAlarms Disabling AlarmPrecautions SpecificationsFCC Statement Declaration of Conformity Standard Warranty Information

TE529ELW, TS33 specifications

The Honeywell TE529ELW/TS33 is a robust and versatile sensing device designed for a variety of industrial and commercial applications. Known for its reliability and precision, the TE529ELW is particularly suited for use in temperature monitoring, which is essential in maintaining optimal conditions in sensitive environments such as HVAC systems, food processing, and pharmaceuticals.

One of the standout features of the TE529ELW is its advanced temperature sensing technology. The device employs a high-accuracy thermistor, providing precise temperature readings with a minimal response time. This is crucial for applications that require rapid detection of temperature changes. The sensing range is extensive, accommodating various settings and ensuring it meets the demands of diverse environments.

The TE529ELW also incorporates a user-friendly design, making installation and calibration straightforward. Its compact form factor allows for easy integration into existing systems, while the robust construction ensures durability even in challenging industrial environments. Whether mounted on surfaces or enclosed within other equipment, the TE529ELW offers flexibility conducive to a broad spectrum of applications.

In terms of communication protocols, the TE529ELW is equipped with modern digital interfaces, allowing it to easily connect to control systems for data logging and monitoring purposes. This feature enhances operational efficiency by providing real-time feedback on temperature fluctuations, enabling prompt intervention when necessary.

Another key characteristic of the Honeywell TE529ELW is its resistance to environmental factors. The device is designed to operate effectively in high humidity and varying atmospheric conditions, which is essential in maintaining accuracy and reliability.

Overall, the Honeywell TE529ELW/TS33 is distinguished by its combination of precision, durability, and ease of integration, making it an ideal choice for businesses aiming to enhance their temperature monitoring capabilities. With its state-of-the-art sensing technology and robust features, it caters to a wide array of industries, ensuring optimal performance and reliability. Whether in industrial settings or commercial applications, the TE529ELW stands out as a dependable tool for effective temperature management.