La Crosse Technology WS2813UIT manual Pressure

The Weather alarms can be set when certain weather conditions are met according to the requirements. For example, you can set the thresholds for the outdoor temperature to +104°F (high) and 14°F (low), while enabling the high alarm and disabling the low alarm (i.e. temperatures <14°F won’t trigger alarm, but temperatures >+104°F will).

∙If the value meets the condition for high alarm or low alarm, the alarm will ring for 2 minutes and the value will blink, along with the corresponding icon ("HI AL"/ "LO AL").

∙Press any key to stop a ringing alarm.

∙The high and low alarms can be switched On/Off independently, according to the needs.

∙If at any time during the alarm setting process you would like to exit alarm setting mode, press the MIN/MAX key or wait for about 30 seconds and the display will return to normal display mode automatically.

∙Press the ALARM key to enter ALARM mode. Subsequent presses of the ALARM key will advance to the next weather alarm section.

Note: Weather alarms can also be set from the Heavy Weather Pro software. Consult the Heavy Weather Pro Software User’s Guide for instructions.

THE FOLLOWING WEATHER ALARMS CAN BE ADJUSTED IN ALARM SETTING MODE:

∙High and Low pressure alarms

∙High and Low indoor temperature alarms

∙High and Low indoor humidity alarms

∙High and Low outdoor temperature alarms

∙High and Low outdoor humidity alarms

∙High wind gust alarm

∙Wind direction alarm

∙Rainfall amount in 24 hour period alarm

DEFAULT WEATHER ALARM VALUES:

Pressure	Low	28.35 inHg
	High	30.71 inHg
Temperature (In or	Low	32°F
Out)
	High	104°F
Relative Humidity	Low	45%
(In or Out)
	High	70%

Wind gust

Wind Direction

Rainfall in 24 hours

High 62.0mph

North

High 1.96 in

P a g e 17