5.Press the SET key to switch the alarm on or off. The ((())) icon indicates the alarm is switched on.
6.Press the ALARM key once. The low outdoor humidity alarm display will be shown.
7.Press and hold the SET key for about 2 seconds. The humidity digit will flash.
8.Press the ▲UP ARROW key or ▼DOWN ARROW key to set the low outdoor humidity alarm value.
9.Press the ALARM key to confirm the setting. The digit will stop flashing.
10.Press the SET key to switch the alarm on or off. The ((())) icon indicates the alarm is switched on.
11.Press the ALARM key to move to the outdoor temperature alarm settings.
WIND GUST ALARM
1.The wind gust alarm display will be shown.
2.Press and hold the SET key for about 2 seconds. The wind gust digit will flash.
3.Press the ▲UP ARROW key or ▼DOWN ARROW key to set the wind gust alarm value.
4.Press the ALARM key to confirm the setting. The digit will stop flashing.
5.Press the SET key to switch on or off the alarm. The ((())) icon indicates the alarm is switched on.
6.Press the ALARM key to move to the wind direction alarm settings.
WIND DIRECTION ALARM
Multiple wind direction alarms can be set simultaneously if desired.
1.The wind direction alarm display will be shown.
2.Press and hold the SET key for about 2 seconds. The wind direction arrow on the outside of the compass circle will flash with the corresponding compass direction or degrees reading displayed in the center of the compass.
3.Press the ▲UP ARROW key or ▼DOWN ARROW key to move the wind direction alarm pointer.
4.Press the SET key to set a wind direction alarm value. A pointer icon will appear inside of the compass circle to indicate an alarm setting for that wind direction.
5.To remove an alarm setting for a wind direction, press the SET key again to remove the selected wind direction alarm. The arrow icon inside the compass circle will disappear.
6.If more than one wind direction is desired as an alarm setting, Press the ▲UP ARROW key or ▼DOWN ARROW key to move the wind direction alarm pointer to the next desired setting.
7.Press the SET key to confirm the next wind direction value. A pointer icon will appear inside of the compass circle to indicate an alarm setting for that wind direction. You can set as many wind direction alarms as you desire.
8.Press the ALARM key to confirm the setting. The digit will stop flashing.
9.Press the SET key to switch on or off the alarm. The ((())) icon indicates the alarm is switched on.
10.Press the ALARM key to move to the 24‐hour rainfall alarm settings.