Tascam DA-45HR owner manual 11HR time display, 12Repeat mode, 13Pre-roll time, 14End tally signal

Page 20

3 - Menu functions

3.11HR time display

H R - T M

T a p e T M

 

 

When recording or playing back in the HR(24BIT) mode, the tape moves at twice the normal speed. The tape counter can use the subcode recorded on the tape as its reference, meaning that the displayed time passes twice as fast as real time, or it can display real time.

The selected display mode is used in PGM Time mode and REMAIN Time mode (see COUNTER MODE [21]). A * symbol appears at the top of the display when real time mode is selected.

The options available in this menu are: TapeTM (using the ABS time in the tape subcode), or RealTM (using real time for the tape counter).

The default value is TapeTM.

NOTE

This menu item only applies to tapes recorded in the HR mode; it has no relevance to tapes recorded in standard mode.

3.12Repeat mode

R e p e a t

1 0 T M S

 

 

This menu item controls the number of times that the playback will repeat when the repeat mode is set (see 4.1, "REPEAT").

The options available are: 10TMS (the playback will repeat 10 times) and UnLimt (the playback will repeat indefinitely until stopped).

The default value is 10TMS.

3.13Pre-roll time

P r e R o l

0 s e c

 

 

Sets a pre-roll time, so that the tape will locate to a fixed point before either of the location memories when the appropriate key (LOC 1 [29] or LOC 2 [30]) is pressed. The setting made here has no effect on locating to the START IDs of programs using the SKIP keys [12] or the DATA dial [20].

The values available are: 0, 1, 2, 3, 4 and 5 seconds.

The default value is 0 seconds.

3.14End tally signal

E n d T L Y

T - E n d

 

 

Controls the timing of the tape end tally signal trans- mitted through the CONTROL I/O [36] port. The signal can either be transmitted at the end of the tape, or at a fixed interval before the tape end.

The values available are: T-End(the tally signal will be transmitted at the end of the tape), 1min, 2min and 3min (the tally signal will be trans- mitted before the end of the tape is reached).

The default value is T-End.

3.15Auto rewind

A t - R e w

o f f

 

 

This menu item determines whether the tape will be automatically rewound when the end of the tape or an END ID is reached in play mode.

The two options available are: off (the tape will not be rewound when the end of the tape or an END ID is reached) and on (the tape will be automati- cally rewound when the end of the tape or an END ID is reached).

The default value is off.

3.16Fast forward mode

F F - K e y

N o r m a l

 

 

This menu item determines whether the F FWD and REW keys will act as cue and review keys, respec- tively, if they are pressed while the tape deck is in play mode. The two settings are Normal (the unit will go from play mode to fast wind) and Cue (the unit will enter cue/review mode when the fast wind keys are pressed).

The setting made here also applies to fast wind com- mands made through the CONTROL I/O [36] con- nector, and using the optional RC-D45 remote control unit.

The default value is Normal.

20 TASCAM DA-45HR

Page 19 Page 21
Image 20
Page 19 Page 21
Contents DA-45HR Important Safety Precautions Important for U.K. CustomersImportant Safety Instructions Table of Contents RC-D45 remote control unit option SpecificationsFeatures Installation of the tape deckIntroduction to the DA-45HR Unpacking and inspectionHead cleaning Making connectionsMaking analog connections Making digital audio connectionsMaking control connections Block DiagramPower connections Tascam DA-45HR Parts of the tape deck Power and displayRecording mode and source switches, etc Record Mode switch Fs switchInput selector switch Digital Input selector switchTape controls Play key Pause keyRecord key REC Mute keyCommand keys Counter ModeShuttle wheel Data dialSkip Play Margin ResetDisplay Rear panel Single PlayDigital AES/EBU INPUT/OUTPUT Digital CoaxialRemote Menu functions Digital output format Digital out word lengthDither Copy prohibit12Repeat mode 14End tally signal16Fast forward mode 11HR time display17Parameter save 18Initializing settings19Viewing points at which block errors have occurred ID markers START, SKIP, END, Char and renumbering Advanced functionsINS/+ and DEL Writing a Start or Skip ID Selecting an ID modeManually writing a Start or Skip ID Writing an END ID Erasing a Start or Skip IDErasing an END ID Erasing titlesSetting location memories Edit keyLocation memories Locating to location memoriesEntering and editing titles Program modeCharacter editing titling Writing the title to tape Checking a titleDeleting a title Copying and pasting a titleRC-D45 remote control unit option Remote control transport keysREC Mute Specifications Audio specificationsI/O specifications Physical specificationsSerious error messages Dimensional drawingError messages DA-45HR

DA-45HR specifications

The Tascam DA-45HR is a professional, high-resolution digital multitrack recorder that has built a solid reputation in the audio industry for its superior quality and versatility. Engineered for demanding recording environments, the DA-45HR is designed to meet the high standards of both studio and live sound applications, making it an indispensable tool for sound engineers and music producers alike.

One of the standout features of the DA-45HR is its ability to record in high-resolution formats, including 96 kHz and 192 kHz sample rates. This ensures that audio quality is preserved at the highest level, delivering crystal-clear sound that captures the nuances of the original performance. The device features a 24-bit digital signal processing architecture, ensuring that dynamic range and clarity are not compromised during recording or playback.

The DA-45HR utilizes advanced D/A and A/D converters, which are crucial for delivering accurate sound reproduction. These converters enable the device to handle a wide frequency response and low total harmonic distortion, allowing for high-fidelity audio outputs that are critical in professional settings. The recorder supports multiple digital formats, including DAT, a popular choice for mastering and archiving.

Another significant characteristic of the DA-45HR is its user-friendly interface. It boasts a clear LCD display that provides real-time feedback on recording levels, making it easy for users to monitor their inputs closely. The intuitive layout of the controls allows for quick navigation through its various features, enhancing workflow efficiency during sessions.

Connectivity options are another highlight of the Tascam DA-45HR. It includes AES/EBU and S/PDIF digital inputs and outputs, as well as analog connections, allowing it to integrate seamlessly into any professional audio setup. This flexibility makes the DA-45HR compatible with a variety of other audio gear, ensuring it can meet diverse recording needs.

In summary, the Tascam DA-45HR is a high-quality digital multitrack recorder that excels in both performance and versatility. Its high-resolution recording capabilities, advanced digital processing technologies, and user-friendly design position it as a top choice for audio professionals seeking dependable and flexible recording solutions. Whether in a studio setup or on stage, the DA-45HR stands out as a reliable instrument for capturing intricate soundscapes.
Top Page Image Contents