La Crosse Technology WS- 1912 instruction manual Manual Settings

* When the signal from the transmitter/ or rain sensor (optional) is successfully received by

the Weather Station, this icon will be switched on. (If not successful, the icon will not be

shown on the LCD). User can therefore easily see whether the last reception was

successful (“ON” icon) or not (“OFF” icon). On the other hand, the short blinking of the icon

Mode 2: Wind gust, dew point, and rainfall (optional) reading are shown.

Note: To view the rainfall data, press the + key after entering Mode 2 display.

shows that a reception is being done at that time.

** In normal display mode, user may press the SET key shortly to toggle between Mode1

and Mode 2 display:

Mode 1: Wind speed, outdoor temperature, relative air pressure are shown.

Wind speed icon

Outdoor temp icon

Dew point icon

Wind gust icon

Rain icon

In Mode 2, this reception icon is showing the condition of the reception of the signal from Rain sensor (only if a rain sensor is being used).

Note: if no rain sensor is used, the reception icon will always be displayed in Mode 2.

Rel. Air Pressure icon

In Mode 1, this reception icon is showing the condition of the reception of the signal from Thermo-hygro transmitter

13

MANUAL SETTINGS:

The following manual settings can be changed once the SET key is pressed and held for about 3 seconds:

∙LCD contrast setting

∙Manual time setting

∙12/24 hour time display

∙Calendar setting

∙°C/ °F temperature unit setting

∙Wind speed unit

∙Rainfall unit setting

∙Air pressure unit setting

∙Relative pressure reference value setting

∙Weather tendency threshold value

∙Storm warning threshold value

14