Bushnell 960900C instruction manual Troubleshooting

Page 13

TROUBLESHOOTING

1.Be sure that you are using Windows 2000, XP or Vista and your PC is connected to the Internet. You need to have Microsoft .NET Framework

1.1 driver installed in your PC in order to complete the installation of the Weather FXi program. Most PCs purchased after 2005 will already have this-if you have an older PC, click“Help and Support”in your Start menu, and then select “Windows Update”.

Or, you can download the driver by going to www.microsoft.com and entering “1.1 net framework” in the search box at the top of the page, then clicking the magnifying glass to search the site. The name of the file you need to install is “dotnetfx.exe”.

2.Check that the USB transmitter is properly connected to the USB port of your PC, so you are able to run the Weather FXi software and access the forecast data updates from the internet. If the Transmitter is disconnected while the Weather FXi program is running, you will see a “Usb Disconnected” pop up window, with options to reconnect the Transmitter and retry sending data to the Receiver, or you may opt to continue to run the Weather FXi program

without automatic updates to the Receiver, or Exit the program.

3.If “PC Not Found-Try Searching Again”

appears on the Receiver display (or “PC Lost”), your PC was shut down or its power interrupted. Make sure the USB Transmitter is connected, and restart the PC. The Weather FXi application should automatically launch after startup (if not, double click its desktop icon). If you see the “Usb Disconnected” message, unplug then reconnect the Transmitter, and click“Retry”. Make sure the Weather FXi application has the current weather data ready to send to the Receiver by clicking “Update” (it may take a few minutes to gather all the 7-Day forecast data from the internet server, especially if you have multiple locations setup. Press the SEARCH button on the back of the Receiver to change its display message to “Searching for PC”, then click “Send to Receiver” in the Weather FXi window. The Transmitter LED should light, then blink as the updated data is sent, and the Receiver display should indicate “PC Found...”

4.Be sure all 4 batteries in the Receiver are fresh. Replace the batteries when the low battery indicator appears.

5.If the toolbar icon for the Weather FXi program disappears (in the lower right of your PC screen), the application was terminated and

13

Image 13
Contents Weatherfx Bushnell Weather FXi Features Setup the Receiver Unit Remote Display Install the SoftwareConnect the Transmitter Connect the USB Transmitter Install the SoftwarePage Setting UP the Receiver Unit LED Front/ Top of Receiver Button Location #/ Name Function RECEIVER/TRANSMITTER Buttons and PartsWeather Forecast Symbols Icons Alarm on IndicatorReceiver Display Guide C D E F K L M RF Radio Frequency Reception StatusReceiver Display Guide Maximum UV Index Forecast Indoor TemperatureForecast Icons Reference Troubleshooting But one or more TWO-YEAR Limited Warranty Bushnell Outdoor Products