Acu-Rite 00634A1, 436, 00634CA, 00634A2 instruction manual Temperature or

Page 13

Troubleshooting

Problem

Possible Solution

 

• Weather Forecast icon predicts conditions for the next 12

 

to 24 hours, not current conditions.

 

• Has Learning Mode icon disappeared from the display

Inaccurate forecast

unit? Learning Mode must complete before forecast and

pressure will be accurate.

 

• Allow unit to run continuously for 33 days. Battery removal

 

or resetting the display unit will restart Learning Mode.

 

After 14 days, forecast should be fairly accurate, however

 

Learning Mode calibrates for a total of 33 days.

 

 

 

• Make sure both the display unit and 3-in-1 sensor are

Inaccurate

placed away from any heat sources or vents (see page 9).

• Make sure both units are positioned away from moisture

temperature or

sources (see page 9).

humidity

• Make sure 3-in-1 sensor is mounted at least 5 ft off of

 

 

the ground.

 

 

 

• What is wind reading being compared to? Pro weather

 

stations are typically mounted at 30 ft high or more. Make

 

sure to compare data using a sensor positioned at the

Inaccurate wind

same mounting height.

• Check location of the sensor. Ensure it’s mounted a

readings

minimum of 5 ft in the air with no obstructions around it

 

(within several feet).

 

•Ensure wind cups are spinning freely. If they hesitate or stop

 

try lubricating with graphite powder or spray lubricant.

 

 

 

• Check that the batteries are installed correctly. Batteries

Display screen

may need to be replaced.

• Reset the display by pressing the reset button, located on

not working

the back of the display unit. Date and time will need to be

 

 

entered after a reset.

 

 

If your AcuRite product does not operate properly after trying the troubleshooting steps, visit www.AcuRite.com or call (877) 221-1252 for assistance.

13

Image 13
Contents Weather Center Unpacking Instructions Package ContentsTemperature & Humidity Sensors Features & BenefitsMounting Bracket B-C Switch not shown Display Unit History Chart Icon Date Low Battery Indicator Atomic ClockMoon Phase History Chart Icon Current Outdoor TemperatureSet the A-B-C Switch IN-1 Sensor SetupInstall or Replace Batteries Remove the battery compartment cover Display Unit SetupAtomic Clock TemperatureSet the Time & Date Select Measurement UnitsImportant Placement Guidelines Placement for Maximum AccuracyDisplay Unit Placement In-1 Sensor PlacementBasic Setup is Complete In-1 Sensor Installation GuidelinesTop or Side Mount Pole MountMoon Phase Using The Weather Center Learning ModeMulti-Variable History Chart Weather ForecastProblem Possible Solution TroubleshootingHigh & Low Records ReceptionTemperature or Specifications Care & MaintenanceFCC Information Display Unit CareCustomer Support Limited One Year WarrantyIt’s more than accurate, it’s
Related manuals
Manual 8 pages 31.35 Kb

00634A2, 00634CA, 436, 00634A1 specifications

The Acu-Rite 436,00634CA,00634A1,00634A2 is a sophisticated indoor-outdoor thermometer and hygrometer that combines advanced technology with user-centric design to maximize functionality and ease of use. Its primary purpose is to provide accurate and reliable temperature and humidity readings, helping users monitor their indoor and outdoor environments effectively.

One of the standout features of the Acu-Rite 436 is its dual display, which allows users to view both indoor and outdoor temperature and humidity levels simultaneously. This feature provides a comprehensive overview of the current climate conditions, which can be especially useful for gardening, home heating and cooling management, or simply keeping track of weather changes.

The device employs a patented self-calibrating technology that utilizes data from multiple sensors. This technology ensures precise readings by calibrating according to the local environment over a period of time. Users can trust that the information displayed is not only real-time but also adjusted for varying atmospheric conditions, leading to greater accuracy.

Additionally, the Acu-Rite 436 is equipped with a wireless sensor that transmits data from outdoors to the indoor monitor without the hassle of wires. The range of this wireless technology is impressive, allowing users to place the sensor in various locations within a significant distance from the main unit without fearing signal loss.

Another notable characteristic is the easy-to-read LCD screen. The large digits make it convenient for users of all ages to read the temperature and humidity at a glance. The display is further enhanced by visual comfort indicators that suggest whether the indoor humidity is at optimal levels or if adjustments are needed.

The device also features a memory function, which records and displays high and low temperature and humidity readings over time. This allows users to review past data, helping them make informed decisions regarding their environment.

In terms of design, the Acu-Rite 436 is sleek and modern, making it an attractive addition to any home or office space. Its user-friendly interface ensures that even those who are not technologically savvy can operate it without difficulty.

In summary, the Acu-Rite 436,00634CA,00634A1,00634A2 is a must-have for anyone interested in gaining insight into their indoor and outdoor environmental conditions. With its dual display, advanced sensor technology, wireless capabilities, and user-friendly design, it stands out as a reliable and efficient tool for monitoring temperature and humidity.