Acu-Rite 00634CA In-1 Sensor Installation Guidelines, Basic Setup is Complete, Top or Side Mount

Page 10

3-in-1 Sensor Installation Guidelines

INSTALLATION HEIGHT Mount the sensor at least 5 feet (1.5 meters) off the ground (higher is better for wind measurement) in an open area. Secure to fence post, 2’x4’ wood, 3/4” pole, etc. (not included)

LEVEL INSTALLATION Use a bubble level (not included) to ensure level installation for accurate wind measurement.

Top or Side Mount

Top Mount

1.

Insert the mounting base into the

 

 

hole on the bottom of the sensor.

 

2.

Use one of the screws included

 

 

in the hardware bag to fasten

 

 

the lower sensor housing to the

 

 

mounting base.

 

3. Make sure the sensor is level using a bubble level.

4. Fasten mounting base to a post or railing using 2 screws.

Pole Mount

1.Insert pole (we recommend 3/4” schedule 40 PVC / 25.8 mm O.D., not included) or similar item all the way into the hole on the bottom of the sensor. Note: Mounting base is not used.

2.Use one of the screws included in the hardware bag to fasten the lower sensor housing securely to the pole.

3.Make sure the sensor is level using a bubble level.

The 3-in-1 sensor is now ready to use.

Basic Setup is Complete

Side Mount

Pole Mount

Do not install during electrical storms. Do not place pole or sensor near electrical lines or electrical equipment.

The 3-in-1 sensor will now synchronize with the display unit. It may take a few minutes for synchronization to complete. If both or one of the units appear to be functioning improperly, please refer to the troubleshooting section.

10

Image 10
Contents Weather Center Package Contents Unpacking InstructionsTemperature & Humidity Sensors Features & BenefitsMounting Bracket B-C Switch not shown Display Unit Moon Phase History Chart Icon Date Low Battery Indicator Atomic ClockHistory Chart Icon Current Outdoor TemperatureSet the A-B-C Switch IN-1 Sensor SetupInstall or Replace Batteries Display Unit Setup Remove the battery compartment coverSet the Time & Date TemperatureAtomic Clock Select Measurement UnitsDisplay Unit Placement Placement for Maximum AccuracyImportant Placement Guidelines In-1 Sensor PlacementTop or Side Mount In-1 Sensor Installation GuidelinesBasic Setup is Complete Pole MountMulti-Variable History Chart Using The Weather Center Learning ModeMoon Phase Weather ForecastHigh & Low Records TroubleshootingProblem Possible Solution ReceptionTemperature or FCC Information Care & MaintenanceSpecifications Display Unit CareLimited One Year Warranty Customer SupportIt’s more than accurate, it’s
Related manuals
Manual 8 pages 31.35 Kb

00634A2, 00634CA, 436, 00634A1 specifications

The Acu-Rite 436,00634CA,00634A1,00634A2 is a sophisticated indoor-outdoor thermometer and hygrometer that combines advanced technology with user-centric design to maximize functionality and ease of use. Its primary purpose is to provide accurate and reliable temperature and humidity readings, helping users monitor their indoor and outdoor environments effectively.

One of the standout features of the Acu-Rite 436 is its dual display, which allows users to view both indoor and outdoor temperature and humidity levels simultaneously. This feature provides a comprehensive overview of the current climate conditions, which can be especially useful for gardening, home heating and cooling management, or simply keeping track of weather changes.

The device employs a patented self-calibrating technology that utilizes data from multiple sensors. This technology ensures precise readings by calibrating according to the local environment over a period of time. Users can trust that the information displayed is not only real-time but also adjusted for varying atmospheric conditions, leading to greater accuracy.

Additionally, the Acu-Rite 436 is equipped with a wireless sensor that transmits data from outdoors to the indoor monitor without the hassle of wires. The range of this wireless technology is impressive, allowing users to place the sensor in various locations within a significant distance from the main unit without fearing signal loss.

Another notable characteristic is the easy-to-read LCD screen. The large digits make it convenient for users of all ages to read the temperature and humidity at a glance. The display is further enhanced by visual comfort indicators that suggest whether the indoor humidity is at optimal levels or if adjustments are needed.

The device also features a memory function, which records and displays high and low temperature and humidity readings over time. This allows users to review past data, helping them make informed decisions regarding their environment.

In terms of design, the Acu-Rite 436 is sleek and modern, making it an attractive addition to any home or office space. Its user-friendly interface ensures that even those who are not technologically savvy can operate it without difficulty.

In summary, the Acu-Rite 436,00634CA,00634A1,00634A2 is a must-have for anyone interested in gaining insight into their indoor and outdoor environmental conditions. With its dual display, advanced sensor technology, wireless capabilities, and user-friendly design, it stands out as a reliable and efficient tool for monitoring temperature and humidity.