Installing the Wireless 5-in-1 Multi-Sensor

SETUP

Installing the Wireless 5-in-1 Multi-Sensor

After installing batteries into the Wireless Multi-sensor, you must choose a location to install the sensor. To ensure that your professional weather center performs at its best, follow these guidelines to choose a mounting location for the wireless multi-sensor:

INSTALL AWAY FROM HEAT & HUMIDITY SOURCES:

DO NOT Place the wireless multi-sensor near localized heat sources like heaters, air conditioners, chimneys and exhaust vents. Install the wireless multi-sensor away from asphalt or concrete as these surfaces radiate heat from the sun. Also avoid installing the sensor near pools, spas, or other bodies of water as these water sources may affect the accuracy of the humidity.

INSTALL AWAY FROM SPRINKLER HEADS:

DO NOT install the wireless multi-sensor where it will be directly sprayed by a sprinkler system, this will affect the rainfall measurement accuracy and may force water into the housing.

WIND & RAIN OBSTRUCTIONS:

DO NOT mount the sensor with obstructions above it, as this will ensure proper rainfall measurement. Also consider a mounting location that has very little structures around the sensor, to ensure proper wind speed and direction measurements.

INSTALLATION HEIGHT:

DO Mount the wireless multi-sensor at least 5 feet off the ground (higher is better for accurate wind measurements) in an open area NO FURTHER than 300 feet (100 meters) from the display console. A typical installation would involve mounting the bracket to a secured length of 2x4 or 4x4 wood (not included).

LEVEL INSTALLATION:

DO Install the wireless multi-sensor as level as possible to ensure accurate rain and wind measurements. Use the bubble level on the top to ensure a level installation.

SOLAR CELL ORIENTATION:

DO Install the sensor onto the mounting bracket with the solar cell facing SOUTH. This is important to ensure that the cell receives as much sun as possible, and also orients the wind direction properly.

SETUP

NO OBSTRUCTIONS ABOVE

OR AROUND

Install the wireless multi-sensor with the solar cell facing south to properly orient the wind direction vane.

Choose an open location with no obstructions above or around the sensor for

(1.5 meters) accurate rain and wind measurement.

Secure the included sensor mounting bracket to a post or pole (not included) utilizing the included hardware.

TO CLEAR DATA COLLECTED DURING INSTALLATION:

During the process of installation, internal sensors were likely triggered-resulting in erroneous rainfall and wind measurements. When installation is complete, you may want to clear out the erroneous data from the display consoles memory.

To clear out the display consoles memory without having to reset the clock and re-establish communication, press the “CLEAR TODAY” button. This button will clear out any data that was recorded since 12:00 am that day. The “CLEAR TODAY” button is located on the back of the display console within the battery compartment.

1035 specifications

Acu-Rite 1035 is a versatile and reliable weather station designed to provide users with accurate and real-time weather information for everyday use. This compact device integrates advanced technologies and features that make it stand out in the market of home weather stations.

One of the primary characteristics of the Acu-Rite 1035 is its ability to offer precise weather readings. It boasts a high-definition display that provides clear and easy-to-read data, including temperature, humidity, wind speed, and rainfall. The station typically uses an outside sensor to capture outdoor conditions, and an indoor sensor to monitor the climate inside the home. This dual-sensor capability enables users to compare indoor and outdoor conditions effectively.

Acu-Rite employs patented Self-Calibrating Technology, which takes data from the outdoor sensor and analyzes it over time to provide users with accurate forecasts. This feature enables the device to generate hyper-local forecasts, increasing its usability and effectiveness. With the help of this technology, the Acu-Rite 1035 generates a 12 to 24-hour weather forecast, allowing users to make informed decisions about their daily activities.

Another standout feature of the Acu-Rite 1035 is its user-friendly interface. The system is designed to be set up quickly and easily, making it accessible for individuals of all skill levels. Users can easily navigate through various readings and settings using simple buttons.

In terms of connectivity, many Acu-Rite models, including the 1035, offer wireless technology, eliminating the need for messy cables. The device typically operates on battery power, which adds to its portability. As a result, it can be placed in various locations for optimal readings.

The Acu-Rite 1035 also includes a built-in clock and calendar, adding functional value to the weather station beyond just meteorological data. This feature allows users to keep track of time while accessing essential weather information in one convenient unit.

Overall, the Acu-Rite 1035 is an ingenious weather station that combines advanced technology with user-friendly features, making it an excellent choice for families, outdoor enthusiasts, gardening aficionados, and anyone interested in monitoring their local weather. Its blend of reliability, accuracy, and convenience positions it as a must-have for tracking and enhancing everyday activities in various weather conditions.