Acu-Rite 1035 Installing Batteries 5-in-1 Multi-Sensor, Installing Batteries Display Console

Page 3

SETUP

Installing Batteries - 5-in-1 Multi-Sensor

A B C

!

SET “ABC” SWITCH TO MATCH

 

 

 

 

 

 

DISPLAY CONSOLE

 

 

 

 

 

 

 

 

 

 

 

 

 

“ABC” SWITCH SELECTION

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 Remove Battery

 

 

Compartment

 

 

Cover

3

Remove Tape

 

 

& Rain Gauge

2 Install 4

 

Stabilizer

 

-discard-

“AA” Alkaline*

 

 

Batteries

 

 

*install lithium batteries for

use in temperatures below -4ºF

NOTE: Make sure to remove the tape and small plastic rain gauge stabilizer installed in the bottom of the sensor housing. The rain gauge will not function until this is removed.

BATTERIES MUST BE INSTALLED FOR THE INTEGRATED SENSOR TO OPERATE: The integrated sensor features a solar cell for collecting sunlight and converting it into usable power, this feature is intended to EXTEND the life of the batteries you install. This sensor REQUIRES batteries be installed to operate, and will not function on solar power alone.

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.

2

Installing Batteries - Display Console

A B C

 

!

SET “ABC” SWITCH TO MATCH

 

 

 

 

 

 

SENSOR “ABC” SWITCH SELECTION

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Remove

WRITE DOWN YOUR

Battery

Compartment

DEVICE I.D. / M.A.C.

Cover

You will need the device ID number that is printed on the back of the display for (OPTIONAL) online connectivity,

so keep it handy!

 

Install 6

Connect

“AA”

power

Alkaline

adaptor

Batteries

The display console will operate under battery power OR AC power alone, however, it is recommended that batteries be installed to retain records and to ensure continued operation during a power outage.

Note that the Weather Ticker will display a scrolling welcome message and basic instructions after powering on.

IMPORTANT: set the time and date as soon as possible, weather history data is driven by the time and date and will record incorrect time and date information if the time and date are not set correctly.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Professional Weather Center Introduction ContentsInstalling Batteries Display Console Installing Batteries 5-in-1 Multi-SensorInstalling the Wireless 5-in-1 Multi-Sensor Setting the Time & Date Currently selected Weather category Display FeaturesLanguage Selection USB PC Connection optionalUSB Modes optional Setting USB ModeUSB Connectivity optional USB Modes OverviewChanging Units Setting Unit preferencesWireless Signal Reception Icon Basic FunctionsWind Speed & Direction Temperature & HumidityWeather Forecast Atmospheric PressurePressure Weather Category History Functions RainfallTurning Alarms on or OFF Weather Category Alarm FunctionsWeather Alarms Alarm Value Adjust ModeWeather TickerTM Weather Category Alarm NotesExtra Weather Ticker Messages Ticker Speed AdjustmentWeather TickerTM Extra Messages Customizing the Weather TickerTMIntegrated Wireless Sensor Maintenance Display Console MaintenanceCalibrating the Display Console Set Wireless I.DDisplay Console Features Integrated Multi-Sensor Features

1035 specifications

Acu-Rite 1035 is a versatile and reliable weather station designed to provide users with accurate and real-time weather information for everyday use. This compact device integrates advanced technologies and features that make it stand out in the market of home weather stations.

One of the primary characteristics of the Acu-Rite 1035 is its ability to offer precise weather readings. It boasts a high-definition display that provides clear and easy-to-read data, including temperature, humidity, wind speed, and rainfall. The station typically uses an outside sensor to capture outdoor conditions, and an indoor sensor to monitor the climate inside the home. This dual-sensor capability enables users to compare indoor and outdoor conditions effectively.

Acu-Rite employs patented Self-Calibrating Technology, which takes data from the outdoor sensor and analyzes it over time to provide users with accurate forecasts. This feature enables the device to generate hyper-local forecasts, increasing its usability and effectiveness. With the help of this technology, the Acu-Rite 1035 generates a 12 to 24-hour weather forecast, allowing users to make informed decisions about their daily activities.

Another standout feature of the Acu-Rite 1035 is its user-friendly interface. The system is designed to be set up quickly and easily, making it accessible for individuals of all skill levels. Users can easily navigate through various readings and settings using simple buttons.

In terms of connectivity, many Acu-Rite models, including the 1035, offer wireless technology, eliminating the need for messy cables. The device typically operates on battery power, which adds to its portability. As a result, it can be placed in various locations for optimal readings.

The Acu-Rite 1035 also includes a built-in clock and calendar, adding functional value to the weather station beyond just meteorological data. This feature allows users to keep track of time while accessing essential weather information in one convenient unit.

Overall, the Acu-Rite 1035 is an ingenious weather station that combines advanced technology with user-friendly features, making it an excellent choice for families, outdoor enthusiasts, gardening aficionados, and anyone interested in monitoring their local weather. Its blend of reliability, accuracy, and convenience positions it as a must-have for tracking and enhancing everyday activities in various weather conditions.
Top Page Image Contents