Download the PC Connect Software

Or, you can navigate to the page above using the following path: www.acurite.com > Support > Manuals & Downloads > Downloads > PC Connect

2 Click the “setupacu-link” file you downloaded and follow the on-screen instructions to install the PC Connect software. A folder named “AcuRite” will be installed on your computer.

3 After PC Connect is installed on your computer, open the PC Connect app. Verify that the display unit is powered on with the AC power adapter plugged in, then connect the small end of

the USB cable into the USB port located inside

the battery compartment on the back of the display unit.

Connect the larger end of the USB cable into a USB port on your computer.

(PC)

Download PC Connect software to your computer by visiting:

http://www.acurite.com/pc-connect-download

The PC Connect software is available online as a free download. An instruction manual for PC Connect is included (PDF file) when you download the software. Read the manual to learn how to setup PC Connect preferences and features.

5 USB functions on the display unit are OFF by default. Verify

the display unit is powered on and receiving data from the outdoor sensor. Next, set the USB mode on the display unit. Set to mode 3 for full PC Connect functionality, or see page 13 for a description of all available USB modes.

6 Select the SAME USB mode in the PC Connect software that you chose on your display unit.

PC Connect is now ready for use. Please note that it may take up to

1 minute for the PC Connect software to begin receiving data from the display unit.