Troubleshooting
Problem | Possible Solution | |
| • Make sure both the display unit and | |
| placed away from any heat sources or vents | |
Inaccurate | (see page 11). | |
• Make sure both units are positioned away from | ||
temperature or | moisture sources (see page 11). | |
humidity | • Make sure | |
| the ground. | |
| • Calibrate indoor and outdoor temperature and | |
| humidity (see page 23). | |
|
| |
| • Check to ensure the rain gauge stabilizer (plastic tab) | |
| has been removed from the bottom of the sensor (see | |
No rainfall | page 7). | |
• Clear debris, such as leaves, out of the rain collector | ||
| ||
| funnel and debris screen. | |
| • Calibrate the Rain Gauge (see page 24). | |
|
| |
| • What is wind reading being compared to? Pro | |
| weather stations are typically mounted at 30 ft high | |
| or more. Make sure to compare data using a sensor | |
Inaccurate wind | positioned at the same mounting height. | |
• Check location of the sensor. Ensure it’s mounted a | ||
readings | minimum of 5 ft in the air with no obstructions around | |
| it (within several feet). | |
| •Ensure wind cups are spinning freely. If they hesitate | |
| or stop try lubricating with graphite powder or spray | |
| lubricant. | |
|
| |
| • Check that the batteries are installed correctly. | |
USB connectivity | Batteries may need to be replaced. | |
• Reset the display by pressing the reset button, located | ||
not working | ||
on the back of the display unit. Date and time will | ||
| ||
| need to be entered after a reset. | |
|
| |
| • Check that the batteries are installed correctly. | |
Display screen | Batteries may need to be replaced. | |
• Reset the display by pressing the reset button, located | ||
not working | ||
on the back of the display unit. Date and time will | ||
| ||
| need to be entered after a reset. | |
|
|
21