*To change from AUTO to MANUAL pressure mode and vice versa, press AND HOLD the “” button for at least 10 seconds. The display indicates the current pressure mode selected,“AUTO” or “MANUAL”.
After 20 seconds of inactivity, the display will save the adjustments and exit calibration mode. Note: Calibrations will be erased if the display is reset or if batteries are removed and the power adapter is unplugged.
Replace Intelli-Time® Clock Battery
1. Locate the coin cell battery | compartment door on the back of the display | |
unit. Unscrew and remove |
| |
the compartment cover. | CR2032 | |
2. Insert 1 x CR2032 coin | ||
3V |
cell battery into the battery compartment, as shown. Install battery with “+” positive terminal facing OUT.
3. Screw in the battery cover.
16