Acu-Rite 02037W, #02036WB Install Batteries Outdoor Sensor, C Wireless Selection

Page 3

SETUP

Install Batteries - Outdoor Sensor

Extended periods of cold temperatures (below -4ºF / -20ºC) can cause alkaline batteries to function improperly. This causes the outdoor sensor to stop transmitting data. Use lithium batteries in low temperature conditions to ensure continuous operation of the outdoor sensor.

40

A/B/C Wireless Selection

To allow for more than one weather station and wireless sensor to be used within close proximity, the display console and outdoor sensor have a small switch labeled “A B C” within the battery compartments. This switch allows you to select one of 3 wireless modes.

PLEASE NOTE: Both switches MUST be set in matching positions (either A, B, or C) for wireless communication.

SETUP

Install Batteries - Display Console

Remove the battery compartment cover. Install 3 fresh “AA” batteries as shown here.

NOTICE!

SWITCH SELECTION

MUST MATCH

WIRELESS SENSOR

SWITCH SELECTION

Remove the battery compartment cover. Install 2 fresh “AA” batteries, as shown.

BATTERIES MUST BE INSTALLED FOR THE SENSOR TO OPERATE.

NOTICE!

SWITCH SELECTION

MUST MATCH

DISPLAY UNIT

SWITCH SELECTION

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE

WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.

BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from

equipment which is not to be used for an extended period of time. Follow the polarity (+/-) diagram in the battery

compartment. Promptly remove dead batteries from the device. Dispose of used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in ￿re, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.

2

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Weather Station Introduction Display FeaturesInstall Batteries Outdoor Sensor C Wireless SelectionInstall Batteries Display Console Quick Setup Display Console Intelli-TimeClock & Calendar Manual Setup Display ConsoleSet your Geographic Region Prevent Wireless Interference Weather Station PlacementPlacement of Display Console Placement of SensorLow or Minimum Records Multi-Variable History ChartDaily High / Low Records Momentary BacklightFor high/low Problem Possible SolutionsBarometric Pressure ReceptionPrecision Forecast Geographic Regions Forecast Calibration ModeImportant Notice

#02036WB, 02037W, 02036WB specifications

The Acu-Rite 02036WB and 02037W are innovative weather stations that provide accurate and comprehensive weather information for home users. Designed for ease of use and reliability, these models incorporate advanced technologies that enable users to make informed decisions based on current weather conditions.

One of the standout features of the Acu-Rite 02036WB is its ability to transmit data wirelessly from the outdoor sensor to the indoor display unit. This allows for real-time updates on temperature, humidity, wind speed, and precipitation levels. The wireless range typically extends up to 330 feet, making it convenient for placement around the home or in the backyard.

The 02036WB and 02037W also come equipped with a high-definition color display, which enhances visibility and readability. Users can easily view critical weather information at a glance, including the current temperature, barometric pressure, and weather forecasts. The touchscreen interface makes navigation straightforward, allowing users to customize settings and access historical data.

Another significant characteristic is the integration of self-calibrating technology. This feature allows the station to adjust to local atmospheric conditions automatically, delivering more precise measurements over time. Furthermore, both models support additional sensors, including rain gauges and anemometers, enabling users to expand their weather monitoring capabilities.

Acu-Rite's proprietary Community Internet Weather Network is another highlight. This feature allows users to share their weather data with a wider community, contributing to a larger pool of localized weather information. The shared data can enhance community awareness and preparedness for weather-related events.

In terms of durability, both the 02036WB and 02037W are built to withstand various weather conditions. The outdoor sensors are weather-resistant, ensuring longevity and consistent performance. With a user-friendly design and robust construction, these weather stations cater to both amateur meteorologists and casual users alike.

Overall, the Acu-Rite 02036WB and 02037W provide a perfect blend of cutting-edge technology and user-friendly features, making them essential tools for anyone interested in monitoring local weather patterns effectively. Whether for gardening, outdoor events, or simply staying informed, these weather stations deliver reliable, accurate data to enhance daily life.
Top Page Image Contents