Epson EX7230 Pro, EX7235 Pro Connecting to a Document Camera, Selecting the Connected USB Source

Selecting the Connected USB Source

You can switch the projector's display to the source you connected to the USB-Aport.

1.Make sure the connected USB source is turned on, if necessary.

2.Press the USB button on the remote control.

3.Press the button again to cycle through other USB sources, if available.

Parent topic: Connecting to External USB Devices

Disconnecting a USB Device or Camera From the Projector

When you finish presenting with a connected USB device or camera, you must prepare to disconnect the device from the projector.

1.If the device has a power button, turn off and unplug the device.

2.Disconnect the USB device or camera from the projector.

Parent topic: Connecting to External USB Devices

Connecting to a Document Camera

You can connect a document camera to your projector to project images viewed by the camera.

Depending on your Epson document camera model, do one of the following to connect the document camera to your projector:

•For the Epson DC-06 document camera, locate the USB cable that came with the camera and connect it to the to the projector's USB-Aport and to the document camera's USB Type B port.

•For the Epson DC-11 document camera, connect it to the projector's Computer or Video port and to the corresponding port on the document camera. See the document camera manual for details.

•For the Epson DC-12 document camera, connect it to the projector's HDMI, Computer, or Video port and to the corresponding port on the document camera. See the document camera manual for details.

36