Acu-Rite 00594W Mounting the Wireless Wind Speed and Wind Direction Sensor, Battery Type

Page 3
Battery O.K.
LOW Battery

MOUNTING THE WIRELESS WIND SPEED AND WIND DIRECTION SENSOR:

Before permanently mounting the wind speed bracket, make sure that the wind-fan and wind-vane can rotate freely without any disruption. Also note that the wind speed sensor bracket arm must be pointing north. The wind speed sensor should be positioned to allow the wind to flow around the sensor unhindered from all directions for the most accurate and correct readings.

OPTIONAL POLE MOUNTING: Both sensors are designed to mount in two ways, either to flat surfaces like wood posts, or to 3/4” schedule 40 PVC pipe (the outside dimension of the pipe actually measures approximately 1, 1/16”). The pipe mounting method is often referred to in these instructions.

The ideal mounting scenario would be for the wireless thermo-hygrometer to be mounted on the north side of the building and for the wind sensor to be mounted well away from the building and high in the air. Please test the wireless signal range before perma- nently mounting.

Since PVC pipe is somewhat flexible, if a tall wind sensor mast is being erected, a larger diameter PVC pipe should be used for the base with a reducer fitting placed at the top.

Plastic pipes used for mounting are non-conductive and reduce the likelihood of lightening strikes.

BATTERIES (not included)

NOTE: Do not install batteries in any of the units until you have read through the initial set-up steps in their entirety.

BATTERY TYPE:

INDOOR UNIT: “AA” (3) alkaline type batteries can be used for the indoor unit.

WIRELESS OUTDOOR UNIT (S): It is recommended that LITHIUM type “AA” batteries be used in any outdoor units when the temperature drops below -4ºF. Alkaline batteries will freeze at very low temperatures and will fail to provide adequate power to the wireless units.

MAIN UNIT BATTERY REPLACEMENT:

When the low battery indicator icon becomes present, it is recommended that you change the batteries. Replace only with the same or equivalent type of fresh alkaline batteries. This method of battery replacement ensures there will be no loss in MIN/MAX and history data. However, if the main unit or sensors have remained without batteries for an extended period of time, the main unit will lose the MIN/MAX memory and all other weather data recordings and will have to be synchronized again.

BEFORE INSTALLING BATTERIES:

Before you install the batteries in the main unit, you will need to have the altitude at which the unit will be operating at ready to enter. This step cannot be skipped or returned to during the initial set-up. Visit www.topozone.com, consult your local library or call our customer service department at 877-221-1252 for altitude information.

BATTERY INSTALLATION:

For the first installation, insert the batteries into the two WIRELESS SENSORS FIRST and then into the main unit.

Thermo-Hygrometer Sensor: Rotate and pull the top casing from the bottom cone by turning the unit upside down and rotating counter-clock wise until casing pulls apart. Insert 2 fresh alkaline “AA” batteries (batteries not included). Replace the battery compartment cover and rotate the top back into the bottom piece.

Wind Sensor: Twist off the top from the bottom and open the battery cover located on the bottom of the sensor. Insert 2 fresh alkaline “AA” batteries. (Batteries not included. Replace battery door cover by putting battery cover on half way and then sliding into place. Twist on the top to the bottom piece.

Main Unit: Open the battery cover located on the back of the unit. Remove the screw set provided for wall mount use and insert 3 fresh alkaline “AA” batteries. (Batteries not included). Replace battery door cover.

NOTE: When reinstalling the batteries while holding down the “CLEAR” button, all user settings will be cleared and the unit will set back to the factory default settings. If no button is pushed during battery replacement, the last record and user settings will be saved.

NOTE: When installing batteries, always install according to the polarity indicated in the battery compartment ( + to + and - to - ).

LOW BATTERY INDICATOR:

Low battery indicator is displayed on the main unit for the main unit and all wireless sensors. When replacing the batteries, please follow the battery installation procedure as mentioned in this instruction manual.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Introduction Overview of Features Getting StartedMounting Instructions Battery Installation Mounting the Wireless Wind Speed and Wind Direction SensorBattery Type Main Unit Battery ReplacementGeneral SET-UP Initial SET-UPWeather and Time Alarms Minimum & Maximum Record ModeGeneral Weather Station Functions Changing Batteries MaintenanceButton Operation Descriptions Accessing the Battery CompartmentsWireless Sensor Battery Replacement ReferencePage Reference Factory Default Settings Page Page Page Page Page Page Page Page Page Important Altitude Instructions

00594W specifications

The Acu-Rite 00594W is a sophisticated wireless weather station designed for both novice weather enthusiasts and seasoned meteorologists. Engineered for reliable performance and convenience, this model provides real-time weather updates, helping users stay informed about environmental conditions.

One of the standout features of the Acu-Rite 00594W is its high-definition color display, which presents current weather data in a clear and easily readable format. The display includes various weather metrics such as indoor and outdoor temperature, humidity, barometric pressure, wind speed, wind direction, and rainfall. The vivid graphics and intuitive layout ensure that even those unfamiliar with meteorological data can quickly understand their local weather situation.

The wireless sensors are a significant highlight of this weather station. They communicate data seamlessly from the outdoor sensor to the indoor display unit, providing real-time updates without the hassle of wired connections. The outdoor sensor is designed to withstand the elements, ensuring accurate readings in various weather conditions.

Another notable technology integrated into the Acu-Rite 00594W is the self-calibrating sensor. This feature utilizes data collected over a 14-day period to provide hyper-local weather forecasts, predicting weather for the next 12 to 24 hours based on real-time conditions. This forecasting capability is a valuable tool for planning outdoor activities or monitoring significant weather changes.

For those who enjoy digital integration, the Acu-Rite 00594W is equipped with a MyAcuRite app compatibility. Users can connect the weather station to their smartphones, allowing them to access their weather data remotely. The app provides notifications about specific weather changes and allows users to monitor conditions from virtually anywhere.

Additional characteristics of this model include a user-friendly setup process and customizable alerts. Users can set preferences for their alerts, ensuring they are notified about critical weather events such as extreme temperatures or heavy rainfall.

In conclusion, the Acu-Rite 00594W is a versatile and reliable weather station that combines advanced technology with user-friendly features. Its comprehensive weather tracking capabilities make it an excellent choice for anyone looking to stay ahead of the weather, whether for personal interest, safety, or professional use. With its wireless design, self-calibrating technology, and mobile app compatibility, this weather station is poised to meet the needs of a broad audience.
Top Page Image Contents